BOSTON I NDUSTR I AL SOLUT I ONS Technical Data Sheet NATRON™ SE™ SILICONE INKS APPLICATION Silicone swim caps Silicone wristbands Silicone medical tubing Silicone coated fabrics Silicone automobile tubes Silicone based substrates Natron™ SE Series Silicone Ink is a two-part component ink Formulated for pad printing and or screen printing onto silicone rubber parts Strong adhesion Silicone Rubber and Silicone coated substrates Resistance to rubbing, chemicals, water, and scratch tests Heat dry and cure ink Pot life of 12 - 24 hours PROPERTIES High Opacity High Gloss Excellent flexibility Exceptional abrasion resistance ADDITIVES Catalyst / Hardener SE-LG Catalyst SE-CT Catalyst SE-LS Catalyst Solvents Speed Packaging 250 grams (0.55 lb) Can 0.5 Kg (1.1 lb) Can 1 Kg (2.2lb) Can Warranty 6 Months INSTRUCTIONS FOR USE Stair the ink before pouring it into a mixing cup Pour the ink into mixing cup. Note the weight Required: Add Catalyst 10% of inks weight Stir thoroughly to ensure homogeneity Add solvent to accomplish additional dilutions for thin film application using the appropriate solvents Print your product Cure the product at the appropriate tempeprature. Di fferent silicones substrates cure at different temprati Warning: Consult the MSDS for solvents prior to use, as its solvent carrier are hazardous

SPECIFICATIONS The data and information given in this sheet is based on our present experiences and testing. Boston Industrial Solutions, Inc. does not warranty the use or application of the products it manufactures or supplies. Our only obligation shall be to replace any defective products supplied by us or to refund the original price of the product after we have determined it to be defective. We assume no liability for any other loss or damage caused direct or indirect by our products. It is absolutely necessary to make printing trials prior to start an entire production run to determine ideal...