- Catalogs
- Boschert GmbH & CoKG
- Safety chuks
- Products
- Catalogs
- News & Trends
- Exhibitions
Safety chuks
Safety chuks
- Single Disc Brake (ESB Mini): Available in manual, pneumatic, and membrane configurations, with a performance rating of 0.1 kW (0.134 hp) and a maximum brake torque of 30 Nm (22.1 ft/lb) at 5 bar (14.5 psi).
- Single Disc Brake (ESB): Types 19-25, 22-30, 30-40, and 40-50 are detailed, with performance at 0.15 kW (0.201 hp) and torque ranging from 40 Nm (29.5 ft/lb) to 90 Nm (66.4 ft/lb).
- Double Disc Brake (DSB): Types 30-40, 40-50, and 50-80 are described, with performance at 0.6 kW (0.805 hp) and torque up to 440 Nm (324.5 ft/lb).
- Extended Opening Angle: Chucks with an extended opening angle of +/- 30° are available for turret winders, facilitating easy beam exchange.
- Handwheel Lock: Recommended for turret winders to ensure safety, with specifications for left or right positioning.
- Automatic Airshaft Inflation: Available in VT-version for types 22-30 to 50-80, ensuring continuous air pressure during operation.
- Hydraulic Opening/Closing: Allows operation from the ground for safety chucks located at high levels.
- Monitoring and Sensors: Proximity sensors can be fitted to identify shaft positions electronically, enhancing safety and ease of operation.
- Aluminium Cones: Various models are available with specific dimensions for different tube diameters.
- Axial and Radial Slides: Available in small and large sizes, with options for motorized adjustments.
- Tension Control - Easy Wind: A standard solution for controlling tension in winding applications.
- Special Solutions: Includes Twin STO Chucks for independent operation, ESB brake with intermediate gearbox for low-speed control, and spring-loaded brakes for emergencies.
- Winding Beam Dimensions: Detailed specifications for length tolerances and journal dimensions.
- Connecting Dimensions: Specifications for connecting dimensions across various chuck sizes.
Catalog excerpts
Content BOSCHERT The Manufacturer Safety Chucks Sliding-Chucks Pneumatic Chucks Safety & Assembly Test Certificate Brakes Clutches Options Accessoire Special Measure & Tolerance
Open the catalog to page 2
Helmut Turowski Silvia Schwarzwalder Sales manager Sales Safety Chucks E-mail: [email protected] E-mail: [email protected] Sabrina Schleith Antoine Pelayo Sales Safety Chucks Designer E-mail: [email protected] E-mail: [email protected] Changes reserved
Open the catalog to page 3
DGUV Test Certificate Name and address of the holder of the certificate: (customer): Boschert GmbH & Co. KG Mattenstraße 1 D-79541 Lörrach-Hauingen Name and address of the Manufacturer: Product designation: Automatic Chucks Geräte- und Produktsicherheitsgesetz 01/2004 GS-DP-01 Grundsätze für die Prüfung und Zertifizierung von Druckund Papierverarbeitungsmaschinen, Anlage 1.2 – Mechanik The type tested complies with the test basis specified above. The holder of the certificate is entitled to affix the DGUV Test mark shown overleaf to the products complying with the type tested, including the specification...
Open the catalog to page 4
Reverse side of the DGUV Test Certificate DGUV Test mark Sicherheit geprüft tested safety 1) no. of certificate Where additional details are given on the certificate, the DGUV Test mark must be supplemented by additional wording reflecting said details. In such cases, the mark may look slightly different from the image shown here.
Open the catalog to page 5
DGUV Test Certificate Name and address of the holder of the certificate: (customer): Boschert GmbH & Co. KG Mattenstraße 1 D-79541 Lörrach-Hauingen Name and address of the Manufacturer: Product designation: Automatic Chucks 2006/42/EG Machinery Directive 06/2006 EN 1010-1 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines, Part 1: common requirements 11/2004 GS-DP-01 Grundsätze für die Prüfung und Zertifizierung von Druckund Papierverarbeitungsmaschinen, Anlage 1.2 – Mechanik The type tested complies with the test basis specified...
Open the catalog to page 6
Reverse side of the DGUV Test Certificate DGUV Test mark Sicherheit geprüft tested safety 1) no. of certificate Where additional details are given on the certificate, the DGUV Test mark must be supplemented by additional wording reflecting said details. In such cases, the mark may look slightly different from the image shown here.
Open the catalog to page 7
Deutsche Gesetzliche Unfallversicherung Fachausschuss Druck und Papierverarbeitung Prüf- und Zertifizierungsstelle im BG-PRÜFZERT GS Test Certificate Name and address of the holder of the certificate: (customer) Boschert GmbH & Co. KG Mattenstraße 1 D-79541 Lörrach Name and address of the Manufacturer: siehe oben Product designation: 2006/42/EG Machinery Directive 06/2006 EN 1010-1 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines, Part 1: common requirements 11/2004 This GS Test Certificate replaces the GS Test Certificate DP...
Open the catalog to page 8
Reverse side of the GS Test Certificate geprüfte Sicherheit geprüfte Sicherheit standard design Approved design for a height of 20 mm or less 1)no. of certificate The holder of the certificate shall comply with the conditions to be observed in the production of the product specified overleaf in order to ensure conformity with the tested type. The Testing and Certification body of Wahr shall, in regular intervals, carry out control measures for monitoring the production and the correct application of the GS mark. The person responsible for the production has been obliged to observe the conditions...
Open the catalog to page 9
Mattenstrasse 1 D-79541 Loerrach-Hauingen Changes reserved [email protected] www.boschert.de
Open the catalog to page 10
[email protected] www.boschert.de
Open the catalog to page 11
Mattenstrasse 1 D-79541 Loerrach-Hauingen Changes reserved [email protected] www.boschert.de
Open the catalog to page 12
[email protected] www.boschert.de
Open the catalog to page 13
Mattenstrasse 1 D-79541 Loerrach-Hauingen Changes reserved [email protected] www.boschert.de
Open the catalog to page 14
[email protected] www.boschert.de
Open the catalog to page 15
Boschert 60 Years of partnership with our customers Customer service, reliability, quality and flexibility are the foundation of our company for more than 60 years. As a customer you become a part of our team from the beginning. You have our complete attention to fulfill your requirements. We listen to you. We act, innovate, and react quickly. Rest assured you have found the best source of knowledge for safety chucks. You can trust us to solve the technical problems of your application. You can expect our technicians and engineers to provide you with the best and safest solution for your application....
Open the catalog to page 16
Fast, reliable and professional customer service New orders are scheduled with the production department and a shipment date is established. Our new computer aided design software helps to speed up solutions for customers special requirements. Our parts are manufactured with the most modern equipment and technology available today. Constant precise quality is gained with CNC controlled machines. Mattenstrasse 1 D-79541 Loerrach-Hauingen Changes reserved [email protected] www.boschert.de
Open the catalog to page 17
Prefabricated sub assemblies allow parts to be machined to customers specification providing better flexibility of delivery time. Rigid quality control during production. Final assembly of Boschert Safety Chucks. The final step is the application of safety labels. From here the shipment of the Safety Chuck joins a world of Boschert Safety Chucks. Mattenstrasse 1 D-79541 Loerrach-Hauingen Changes reserved [email protected] www.boschert.de
Open the catalog to page 18
[email protected] www.boschert.de Mattenstrasse 1 D-79541 Loerrach-Hauingen Changes reserved 2.0 Overview Safety chucks
Open the catalog to page 19
Boschert-Chuck Mini Mini STO Mini STW Mini FLO Mini FLW Boschert foot mounted chuck without shaft end Boschert foot mounted chuck with shaft end Boschert flange mounted chuck without shaft end Boschert flange mounted chuck with shaft end Info C Type: Journal shaft type: square bar / triangle standard Shaft end: brakes Add. parts: clutches Mattenstrasse 1 D-79541 Loerrach-Hauingen (b) Changes reserved [email protected] www.boschert.de
Open the catalog to page 20All Boschert GmbH & CoKG catalogs and technical brochures
MP 40202 Pages
FiberLaser6 Pages
Overview Brochure16 Pages
Eccoline2 Pages
CuProfi6 Pages
CombiLaser6 Pages
Notching machine2 Pages
Press Brake4 Pages
BÜNDELPETER1 Page
Bending and Shearing19 Pages
Profi 28/562 Pages
Notching Machines2 Pages
COMBICUT2 Pages
ErgoCut2 Pages
TWIN/TRI2 Pages
Punching Machines Multipunch2 Pages
- Cutting system
- Metal cut-off machine
- CNC cutting center
- Laser cutting machine
- Grinding machine
- Sheet metal cutting machine
- Bender
- Fiber laser cutting machine
- Hydraulic bending machine
- Sheet cutting machine
- Surface grinding machine
- Punching center
- Press brake
- Sheet metal shear
- CNC press brake
- Deflashing machine
- Tool grinding machine
- Hydraulic press brake
- Automatic punching center
- Precision press brake