DI4
20Pages

{{requestButtons}}

Catalog excerpts

DI4 - 1

rexroth A Bosch Company Features ► Freely programmable visual HMI - Composition of display content, operating element functions and behavior with CODESYS V3.5 development environment - Variable lighting of operating elements and icons (color, intensity) ► Intuitive operation of the DI4 - Ergonomic buttons and push-turn control with haptic feedback - Acoustic feedback via integrated loudspeaker / audio out ► Flexible installation in the cab - Alignment is possible in 90° steps - Standalone (RAM Mount® or customer-specific solution) - Integrated into the dashboard (mounting frame) ► Integration of BODAS-service functions - Search function for connected BODAS RC controllers in the CAN bus network - Representation and configuration of parameters and process variables - Import- / export-function for parameter files via USB-interface - Flashing of BODAS RC controllers via DI4 ► DI4 professional version - Touchscreen - Ethernet ► 7" color display with 800 x 480 pixels ► iMX6 Solo processor, 800 MHz ► 2 GB flash memory and 512 MB RAM ► Interfaces: - 2x CAN 2.0B - 1x USB 2.0 - 3x digital/analog inputs - 2x digital outputs - 2x analog video inputs (PAL, NTSC) ► Integrated ambient light sensor ► 4x status-LEDs (1x multi-color, 3x single color) ► Real-time clock with power reserve (500 h) Content Type code 2 Connector pinning on the display 10 Additional offer and sales conditions 15

Open the catalog to page 1
DI4 - 2

DI4 Series 10 | BODAS display Type code Note: The BODAS DI4 is not functional without prior programming. A project must be created with CODESYS V3.5 development environment (PC tool from 3S-Smart Software Solutions GmbH) and transferred onto the DI4. Description With the BODAS display DI4, Bosch Rexroth is offering a freely programmable high-resolution color display with a powerful 32 bit processor and a 7" display. Depending on the programming, the display enables, for example, process variables, static and dynamic graphic elements and the operation of machine functions to be displayed on...

Open the catalog to page 2
DI4 - 3

BODAS display | DI4 Series 10 Description The BODAS display can be connected to a 12 V or 24 V on-board batterie-voltage. The internal real time clock is The DI4 is freely programmable using CODESYS V3.5 buffered against supply voltage interruption (approx. 500 development environment from the supplier 3S-Smart h). Communication with the BODAS controllers of the Software Solutions GmbH. This standard tool is extended current series and other electronic assemblies in the by a product-specific Bosch Rexroth software-package. A machine takes place via CAN bus. The DI4 PRO displays design...

Open the catalog to page 3
DI4 - 4

DI4 Series 10 | BODAS display Description Applications and installation variants The BODAS display can be used as a dashboard display and/or user interface. Installation can be either integrated into the control panel or can be done as a standalone device within the drivers cabin. A mounting frame is available for dashboard integration. A mounting flange for standalone installation is available on the back of the device. Mounting is done using defined screwing points and is compatible with the RAM Mount® system.

Open the catalog to page 4
DI4 - 5

BODAS display | DI4 Series 10 Technical data 1) USB mass-storage devices need to provide signal levels compliant with existing USB specifications. USB-products compliant with these standards usually are marked with corresponding product labels on package or data-sheet.

Open the catalog to page 5
DI4 - 6

DI4 Series 10 | BODAS display Description Results at direct light Results at circa 45° light irradiation irradiation Ambient light Sensor output Ambient light Sensor out-[Lux] value [Lux] put value 1 Display 7“, 800 x 480 px 2 Button bar left side, 6 freely configurable softkeys 3 Button bar right side, 6 freely configurable softkeys 4 LED status green 5 LED status yellow 6 LED status red 7 Multi-color status LED 8 Ambient light sensor 9 “Home” button hardkey 10 Push-turn control 11 Back” button hardkey

Open the catalog to page 6
DI4 - 7

BODAS display | DI4 Series 10 DI4 dimensions Front and side view Back, housing cover with connection surface for mounting bracket Tightening torque for RAM mount (M5): 4.5 Nm, tightening torque of M12 × 1 screw for connector: 0.6 Nm The pressure compenstation element needs mechanical protection

Open the catalog to page 7
DI4 - 8

DI4 Series 10 | BODAS display Connection diagram Headphone / audio Audio left Audio right gnd usb_vcc usb_gnd usb_d-usb_d+ USB_ID (A/D3) Connection of PIN19 dependent on requested USB-function Video M12 Screened line necessary Videosignal + Switching output Camera supply + Camera supply -Videosignal GND Video M12 Videosignal + Switching output Camera supply + Camera supply -Videosignal GND i) To assure the correct functionality of the product, both clamps GND and CARGND have to be connected.

Open the catalog to page 8
DI4 - 9

BODAS display | DI4 Series 10 Overview functions Main function Alternative function Battery positive operating range 9 V DC to 32 V DC Battery negative Vehicle chassis Output AUDIO_L, AUDIO_R, GND Audio output CAN-interface CAN 2.0 B, up to 1 Mbaud, terminating resistor external 120 Ω necessary, standard diagnosis interface with factory setting 250 kBaud CAN-interface CAN 2.0 B, up to 1 Mbaud, terminating resistor external 120 Ω necessary Ethernet interface USB-interface Pin 19 needs to be projected switchable to be able to use the USB main or alternative function if necessary. DI4 acts as...

Open the catalog to page 9
DI4 - 10

DI4 Series 10 | BODAS display Connectors on the display Connectors on the display Ethernet connection (M12, D-coded)2) Main connector (Tyco AMP 1437288-6) Pin Assignment Description Battery plus, terminal 30 Battery minus, terminal 31 Vehicle chassis Multifunctional input or USB_ID Multifunctional input Switching output Multifunctional input Multifunctional input Camera supply - View from DI4 rear side Service enable - necessary for updating BSP / firmware Digital output Digital output View from DI4 rear side View from DI4 rear side Tightening torque of the M12 × 1 for connector ports: 0.6...

Open the catalog to page 10
DI4 - 12

DI4 Series 10 | BODAS display Accessories Mounting frame (R917010011) Material for fixation of the mounting frame inside the dasboard is not scope of delivery. Recess Front and side view For the mounting of the assembly frame the screw heads may not exceed a diameter of maximum ø 10.5 mm and a maximum height of 3.4 mm. The recess and the material arround need to be sufficiently stiff against deflection and must not incresase vibrations.

Open the catalog to page 12

All Bosch Rexroth - Mobile Hydraulics and Electronics catalogs and technical brochures

  1. WGM

    8 Pages

  2. WGM07

    8 Pages