Roller Rail Systems (Additional roller runner blocks SNS R1822, SLS R1823, FXS R1854)
16Pages

Electric Drives Linear Motion and LJ^^'V |"^)t M and Controls I Hydraulics I Assembly Technologies I Pneumatics I Service l»wAI WH I Bosch Group Roller Rail Systems (Additional roller runner blocks The Drive & Control Company

Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical Elements Manual Production Systems Transfer Systems

R310EN 2315 (2010.09) I Roller Runner Blocks SNS/SLS/FXS Roller Rail Systems - Additional roller runner blocks SNS, SLS, FXS Roller Runner Block 10 SNS - Slimline, normal, standard height 10 SLS - Slimline, long, standard height 12 FXS - Flanged, extra long, standard height 14 Product Overview The new roller runner blocks SNS R1822 (slimline, normal, standard height) and SLS R1823 (slimline, long, standard height) and FXS R1854 (flanged extra long, standard height) expand the already extensive range of Rexroth Roller Rail Systems by another 3 series. For more information on Roller Rail...

Roller Runner Blocks SNS/SLS/FXS I R310EN 2315 (2010.09) Standard Roller Runner Blocks made of steel Rigidity of the roller rail system Standard roller runner blocks SNS 1822 measured values Roller runner block mounted using 6 screws of strength class 12.9

R310EN 2315 (2010.09) I Roller Runner Blocks SNS/SLS/FXS Rigidity of the roller rail system Standard roller runner blocks SNS 1822 measured values Roller runner block mounted using 6 screws of strength class 12.9

Roller Runner Blocks SNS/SLS/FXS I R310EN 2315 (2010.09) Standard Roller Runner Blocks made of steel Rigidity of the roller rail system Standard roller runner blocks SLS R1823 measured values Roller runner block mounted using 6 screws of strength class 12.9

R310EN 2315 (2010.09) I Roller Runner Blocks SNS/SLS/FXS Rigidity of the roller rail system Standard roller runner blocks SLS R1823 -measured values Roller runner block mounted using 6 screws of strength class 12.9

Roller Runner Blocks SNS/SLS/FXS I R310EN 2315 (2010.09) Standard Roller Runner Blocks made of steel Rigidity of the roller rail system Standard roller runner blocks FXS R1854 measured values Roller runner block mounted using - 4 screws of strength class 12.9 - 2 screws of strength class 8.8

R310EN 2315 (2010.09) I Roller Runner Blocks SNS/SLS/FXS Rigidity of the roller rail system Standard roller runner blocks FXS R1854 -measured values Roller runner block mounted using - 4 screws of strength class 12.9 - 2 screws of strength class 8.8

Roller Runner Blocks SNS/SLS/FXS I R310EN 2315 (2010.09) Standard Roller Runner Blocks made of steel Roller Runner Blocks SNS Slimline, normal, standard Corrosion-resistant runner blocks, Resist CR, matte silver hard chrome Preload classes Note on dynamic load capacities and Determination of the dynamic load capa- cities and moments is based on a travel Often only 50 000 m are actually stipula- ted. For comparison: Multiply values

R310EN 2315 (2010.09) I Roller Runner Blocks SNS/SLS/FXS Standard Roller Runner Blocks SNS R1822 ... 10 Open lube bore as required (see "Lubrication" section in the main "Roller Rail Systems" catalog). b) Recommended location for pin holes (see "Mounting Instructions", section on "Locating Pins" in the main "Roller Rail Systems" catalog). Due to manufacturing reasons, there may be rough-drilled holes at the recommended positions. These may be bored open to accommodate the locating pins. c) Lube nipple, thread M6 - 8 deep: can be fitted on all sides (end face only on size 25). Other lube...

Roller Runner Blocks SNS/SLS/FXS I R310EN 2315 (2010.09) Standard Roller Runner Blocks made of steel Roller Runner Blocks SLS Slimline, long, standard height Corrosion-resistant runner blocks, Resist CR, matte silver hard chrome Preload classes Note on dynamic load capacities and Determination of the dynamic load capa- cities and moments is based on a travel Often only 50 000 m are actually stipula- ted. For comparison: Multiply values

R310EN 2315 (2010.09) I Roller Runner Blocks SNS/SLS/FXS Standard Roller Runner Blocks SLS R1823 ... 10 Open lube bore as required (see "Lubrication" section in the main "Roller Rail Systems" catalog). b) Recommended location for pin holes (see "Mounting Instructions", section on "Locating Pins" in the main "Roller Rail Systems" catalog). Due to manufacturing reasons, there may be rough-drilled holes at the recommended positions. These may be bored open to accommodate the locating pins. c) Lube nipple, thread M6 - 8 deep: can be fitted on all sides (end face only on size 25). Other lube...

Roller Runner Blocks SNS/SLS/FXS I R310EN 2315 (2010.09) Standard Roller Runner Blocks made of steel Roller Runner Blocks FXS Flanged, extra long, standard Corrosion-resistant runner blocks, Resist CR, matte silver hard chrome Preload classes Note on dynamic load capacities and Determination of the dynamic load capa- cities and moments is based on a travel Often only 50 000 m are actually stipula- ted. For comparison: Multiply values

R310EN 2315 (2010.09) I Roller Runner Blocks SNS/SLS/FXS Standard Roller Runner Blocks FXS R1854 ... 10 a) For O-ring: open lube bore as required. b) Lube nipple, thread M6 - 8 deep: can be fitted on all sides (end face only on size 25). Other lube fittings will have different dimensions. For more details on lube fittings, see the "Accessories" section in the main "Roller Rail Systems" catalog. c) Due to manufacturing reasons, guide rails in accuracy class H may not have a groove on the base. 1) Dimension H2 with cover strip 2) Dimension H2 without cover strip 4) Dimension T2 = hole spacing...

Bosch Group Assembly Technologies www. bosch rexroth .com/del Find your local contact person here: Subject to technical modifications