Single-axis BASIC OPEN LOOP

Product catalog summary

Overview: The document provides technical specifications and operational details for Bosch Rexroth AG's single-axis control units designed for frequency converter applications without an encoder. These units are part of the BASIC OPEN LOOP series and are intended for use in electric drives and controls.

Specifications: The control units allow target speed settings via analog or digital inputs, with status and diagnostic messages output through digital outputs or isolated relay contacts. Key technical data includes:

Control communication: Analog/digital for Open Loop operation
Operating panel: Standard
Cycle times: Current control at 125 µs, Speed control at 250 µs, Position control at 500 µs
PWM frequency: 4 kHz
Inputs/outputs: 8 digital inputs, 2 analog inputs, 2 analog outputs, 3 relay outputs
Interfaces: RS232
Control voltage: 24 V DC
Power consumption without options: 7.5 W

Usage and Recommendations: For easy start-up, it is recommended to use a PC with the Rexroth IndraWorks engineering framework. The document emphasizes that the data provided is for product description only and does not guarantee suitability for specific applications. Users are advised to conduct their own assessments and verifications.

Additional Information: The document includes contact information for Bosch Rexroth AG in Germany and notes that the products are subject to wear and aging. It also mentions that the information is subject to change as products are further developed.

Catalog excerpts

Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com Control units Single-axis BASI

Open the catalog to page 1

Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com Bosch Rexroth AG | Electric Drives and Controls Control units Single-axis n BASIC OPEN LOOP This control unit is specifically designed for frequency converter applications without an encoder. The target speed can be set via analog or digital inputs. Status and diagnostic messages are output via digital outputs or isolated relay contacts. For an easy start-up use a PC with the Rexroth IndraWorks engineering framework. Technical data OpenLoop IndraDrive control units...

Open the catalog to page 2

Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com Electric Drives and Controls | Bosch Rexroth AG Control units Single-axis n BASIC OPEN LOOP Electric Drives and Controls, PDF version, status 2014-05-26, © Bosch Rexroth AG, subje

Open the catalog to page 3

Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com Bosch Rexroth AG Postfach 13 57 97803 Lohr, Germany Bgm.-Dr.-Nebel-Str. 2 97816 Lohr, Germany Tel. +49 9352 18-0 Fax +49 9352 18-8400 www.boschrexroth.com/electrics Local contact information can be found at: www.boschrexroth.com/adressen © Bosch Rexroth AG 2012 Subject to modification. Printed in Germany The data specified above only serve to describe the product. As our products are constantly being further developed, no statements concerning a certain condition...

Open the catalog to page 4

All Bosch Rexroth - Electric Drives and Controls catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list