The GSL 2 Professional floor surface laser
14Pages

Real Bosch!  The world’s rst  oor surface laser NEW! The GSL 2 Professional oor surface laser Finally there is a simple way to check the atness of oors. It is easy, fast and accurate. Blue power tools: For trade and industry.

The oor scanner Check to be safe Be honest. Do you check oor surfaces completely and accurately every time? This was almost impossible anyway with the previous point-by-point methods. Or if at all possible, it would require a lot of time and personnel. This is now visibly easier to do because the new GSL 2 Professional enables you to check oors completely in no time. It is ideal for everyone who works with oor surfaces – for composite oor layers, tilers, parquet layers, drywallers and surveyors. Inspection is compulsory. If a tradesman discovers surface irregularities that exceed the...

Very fast No need to bend down, re-measure, or get someone to assist you: even large surfaces can be comfortably checked by only one person – even by remote control! Very precise The oor surface laser enables you to see surface irregularities at a glance, and inspecting with this instrument is 100% reliable and millimetre-accurate. Complete coverage Unlike all previous methods, the GSL 2 Professional checks oor surfaces completely in just a few minutes instead of only checking point by point or requiring a lot of time.

Ground control Bring every aw to light For the rst time, the GSL 2 Professional enables professional tradespeople to check the atness of oors completely and easily. The principle is ingeniously simple – and simply ingenious. The oor surface laser projects two lines onto the oor. If the surface is at, the lines will be exactly on top of each other. The user will see them as only one line. Where the lines are apart, the oor is not at.

Result: depression The right-hand line of the two V-shaped lines will deviate to the left of the corresponding reference line where there are indentations in the oor. Instantly visible: depressions or elevations Previous methods usually only checked oor surfaces point by point. No matter how big the room is, even the smallest surface irregularities will now not go unseen because wherever two Result: elevation laser lines are visible instead of one, users can be If the surface irregularity is an elevation, sure that a surface irregularity is to blame. the right-hand laser line will deviate...

These are once and for all a thing of the past Spirit level: awkward and painstaking Spirit levels are the most widespread method of checking oors. But measuring with them is extremely inconvenient, especially in large rooms. Rotation and line lasers: all-round limitations Rotation and line lasers are indeed relatively accurate. But as with all previous measurement methods, they only check point by point and require a lot of time and personnel because the inspection is performed with a levelling sta or yardstick. Levelling instruments: expensive teamwork Levelling instruments are accurate...

Millimetre-accurate: the target The user can instantly check whether and how much a surface irregularity deviates from the permitted tolerance – using the specially developed target: the left-hand laser line meets the mark on the target.

One-man show Check oors completely and quickly – all on your own

A laser now makes it easy to do what used to be really backbreaking work. You can even check large rooms in no time using the Bosch GSL 2 Professional oor surface laser. The set version comes with a remote control that enables you to check quickly, slowly or step-by-step! Set up the instrument Set up the instrument for measurement in a central location. Switch it on. Set the height according to a reference point Then set it so that the two laser lines are exactly on top of each other. Check the oor atness Rotate the instrument’s head (manually or by remote control) to completely check the...

There’s more in it for professionals GSL 2 Professional – Scope of delivery ▶ GSL 2 Professional (without motor) ▶ Laser viewing glasses ▶ Laser viewing glasses ▶L -BOXX carrying case ▶ Charger ▶ RC 2 remote control ▶ 3 x AAA 1.5 V (for the remote control) ▶L -BOXX carrying case RC 2 remote control Range of up to 20 m, low weight, easy to operate, 3 speed levels Carrying case L -BOXX made of robust plastic for safe and convenient transport Laser viewing glasses improve the visibility of the laser beam Bosch PT 10.8 V Li-Ion battery with reliably high performance (up to 15 hours), quick...

Laser class Self-levelling range Laser visibility with target Height adjustment Dust and splash protection Power supply Operating temperature fast 1 rpm / slow 0.3 rpm / step-by-step Rotation speed

One for all Real advantages that you benet from “Checking oors with a spirit level is so monotonous. I’ve been waiting for years for somebody to invent a better way of doing it.” Roland Maier, composite oor layer

Not only composite oor layers understand just how important it is to check oor atness. It is also a basic requirement for many other trades to ensure quality. “Customers want bigger and bigger tiles. But “If we don’t discover surface irregularities they’re more expensive and they break more until we start laying, they always cost us an easily. So it’s all the more important that the unbelievable amount of time. So it’s obviously worth performing a complete check.” Tino Martin, tiler Sven Schmidt, parquet layer “Installing drywalls is precision work because “Checking oors is painstaking....

Robert Bosch Ltd Power Tools Division PO Box 98 Uxbridge Middlesex UB9 5HN Tel. 0844 736 0107 1) www.bosch-professional.co.uk 4 pence per minute from a BT landline, call charges from other networks will vary and mobiles may be significantly more 1619EA2717 – GB – Printed in Federal Republic of Germany – Subject to technical alterations. No liability is accepted for printing errors. * For all professional blue power tools when registered within four weeks of purchase at www.bosch-professional.com/warranty