BORINLINE
16Pages

FLEXIBLE COUPLINGS

Bortek Pipe Coupling Systems info / order by mail bortek@bortek.com.tr

Bortek Pipe Coupling Systems Borinline Borinfinit

BORINLINE / INTERNAL REPAIR OD 400.0 - OD 4000.0 Applications: For all kind of pipes Steel, GRP, HDPE, PVC, ductile font, ACP, concrete etc. . . Technical specification: Operating pressure up to 20 bar Sealing system: • EPDM -20°C up to 120°C Medium: water, waste, air solids chemical products • NBR -20°C up to 80°C Medium: water, gas, oil, fuel and other hydrocarbons Dove tail fastener: • AISI 304 • AISI 316 • AISI 316Ti • Other alloys on request Locking system: Strip insert (optional to cover big size of holes): Remarks: Any other size available Follow fitting / disassembly instructions

BORINLINE / INTERNAL REPAIR OD 400.0 - OD 4000.0 Seal lips with four-channels for high reliability of tightness Sealing chanals Tension band Axial movements and angular deflections (axial non restraint) Radial deformation and vibration absorber On axial movement the rubber seal moves with the pipe without any abrasion or any migration Dove tail fastener Tension band chanal Safety factor and test pressure according your request Most efficient way to repair accessible pipes Sealing chanals Bolts-Nut Torque Values Nominal Diameter Strip Thickness Tightening Torque Locking Unit SMALL SMALL...

BORINLINE / INTERNAL REPAIR OD 400.0 - OD 4000.0 Dove tail fastener and dimension adjustment plate Dove tail fastener • Very simple and reliable installation Dimension adjustment plate offers high flexibility (optional ) Borinline Gasket Cut View

BORINLINE / INTERNAL REPAIR OD 400.0 - OD 4000.0 Borinline Tensioning Bands • AISI 304 standard material Thickness of material changes according to dimension Assembling hole Bolt with allen head Tension nut Dove tail fastener Dove tail unit Connecting of BORINLINE with BORINFINIT Applying BORINFINIT The first modul is a BORINLINE, followed by unlimited connections of BORINFINIT modules. Each connection will be sealed by a tension band. www.borinline.com Remarks: Any other size available Follow fitting / disassembly instructions

BORINLINE / INTERNAL REPAIR OD 400.0 - OD 4000.0 Borinline Application Repair of muff section Covering wide gap Angular deflections easy to handle Renforcement part to cover big holes (optional) Sealing channels Muff seal Borinline gasket Strip insert (optional) Tension band Repair of sleeve systems Mostly seen on GRP or asbestos pipes Very simple and reliable installation Also used as test unit of those pipes Borinline gasket Strip insert (optional) Tension band Sealing channels Pipe collar Sealing sleeve

BORINLINE / INTERNAL REPAIR OD 400.0 - OD 4000.0 Borinline Application Leakage across the welding seams • No drying of repair zone necessary Alternative use instead of outside coupling Sealing channels Strip insert (optional) Welding zone Tension band Damage on several areas • Simultaneous repairing of one or more fractures Modular extensible Borinline and Borinfinit Borinline gasket Sealing channels Strip insert (optional) Tension band

BORINLINE / BORINFINIT INTERNAL REPAIR SYSTEM OD 400.0 - OD 4000.0 Modular system Borinline and Borinfinit Material specification see page 4 Lenghts calculation: 1x Borinline 1x Borinline plus 1 x Borinfinit 1x Borinline plus 2 x Borinfinit 1x Borinline plus 3 x Borinfinit Each supplementary Borinfinit modul offers you an extension of 400mm. Sealing Canals Sealing Canals Rubber Locking Canals Retaining Band Canals Applying Borinfinit, the first modul is a Borinline, followed by unlimited connections of Borinfinit modules Remarks: Any other size available Follow fitting / disassembly...

BORINLINE / BORINFINIT INTERNAL REPAIR SYSTEM OD 400.0 - OD 4000.0 Concrete pipe DN1600 damaged length 800mm Solved by using 1x Borinline and 2x Borinfinit Repaired in two hours Steel pipe DN1800 damaged length 380mm Solved by using 1x Borinline and 1 Borinfinit Borinfinit gasket Connecting chanals Borinline gasket Sleeve sealing Pipe collar Tension band

BORINLINE / PIPE JOINT TEST SYSTEM OD 400.0 - OD 4000.0 Pipe joint test apparatus Technical specifications see page 4 The system has to be designed according your requested test pressure Test system has been created to test the muff or sleeve connections from inside Manometer ( optional) The unit is re-usable The sealed location can be tested with air or with water at 3 bar Immediate visual tightness control of the tube connection Adjustment plate (optional) Remarks: Any other size available Follow fitting / disassembly instructions Dove tail fastener Fixing nut Dove tail fastener Expansion...

BORINLINE / PIPE JOINT TEST SYSTEM OD 400.0 - OD 4000.0 A - Tension band B - Dove tail fastener C - Expansion wedge D - Fixing nut E - Bolt with allen head Nominal Diameter Strip Thickness Tightening Torque Locking Unit SMALL SMALL SMALL SMALL MEDIUM MEDIUM MEDIUM MEDIUM HEAVY AISI 316 AISI 316 AISI 316 AISI 316 AISI 316 AISI 316 AISI 316 AISI 316 AISI 316 HEAVY HEAVY

BORINLINE / BORINFINIT in application

BORTFK BORl VE TESlSAT TEKNOLOjlLERl D15 TtC. LTD. BORTFK BORU VE TESISAT TEKNOLOjlLERl •»I — IK LTD. BORTFK BORL' VE TESlSAT TEKNOLOjlLERl Dl$ TtC. LTD.

most efficient way to connect two pipes EUROPE office: TORGEN (Switzerland) GmbH Kesselstrasse 2 CH - 8957 Spreitenbach Phone: + 41 56 419 71 00 Fax: +41 56 419 71 09 www.torgen.com / torgen@torgen.ch