Borflex
10Pages

Used safely in every type of pipes as steel, GRP, HDPE, PVC, pig, ductile font, ACP and etc... Production to test pressure PN40. Pipe is one-piece - lip seal dual-channels. Body; AISI304, 316 or 1024 galvanized steel. EPDM, NBR, orVITON sealing material. Vacuum support part (optional) It affects both flex and compansator by providing FLEX COUPLINGS - FLEX TYPE (SINGLE PIECES) REPAIR COUPLINGS - REP TYPE

ANCHORING RING BODY WIDTH :AISI 304 (Optional: AISI 316) (Optional: NBR, VITON or SILICON) : AISI 301 ( Plastgrip AISI 304) : AISI 304 (Optional AISI 316) AISI 304 (Optional AISI 316) WAFER TYPE CLAMPS BODY WIDTH SINGLE PIECES STEM TYPE WAFER CLAMPS DOUBLE PIECES AISI 304 (Optional AISI 316) EPDM (WAFER) (Optional NBR) AISI 304 (Optional AISI 316) with TEFLON Wafer type clamps produce with welding SIMPLE PIECES DOUBLE PIECES BOLT & STEM BODY WIDTH AISI 304 (Optional AISI 316) EPDM (WAFER) (Optional NBR) Dacromat - 500 coated steel

DIFFERRENT PIPE COUPLINGS BODY WIDTH AISI 304 (Optional AISI 316) BORSTEP CUT-VIEW BRANCHMAN COUPLINGS - CLAMPS BORSTEP COUPLING STANDARD TYPE SERVICE VALVE TYPE WAFER TYPE EXPANSION TYPE COUPLING SADDLE TYPE COUPLINGS WIDTH EXPANSION RATE FLEX TYPE PIPE ADAPTOR ( with Epoxy paint) Galvanized steel SMALL TYPE LARGE TYPE FLANGED TYPE Optional Reducing Type

PIPE INSIDE REPAIR SYSTEM DN500-DN4000 BORINLINE TENSION BELTS TENSION APPARATUS EPDM RUBBER AISI 304 - (Optional AISI 316) Investment casting stainless steel Allen head coupled hexagonal nut 12.9 quality steel (Optional AISI 304 or AISI 316) BORINLINE INSTALLATION PICTURE BORINLINE CUT-VIEW BORINFINIT CUT-VIEW (ADDING PARTS) BORINLINE EPDM REINFORCEMENT SEALING SLEEVE PART (304 . 316 or PVC TENSION BAND INSTALLATION PICTURE BORINLINE EPDM SEALING BODY TENSION BAND SUPPORT PART INSTALLATION PICTURE

PIPE PLUG SMALL TYPE PLUGY DN40-300 mm SMALL TYPE PLUGY WITH BY-PASS- DN40 - DN300 mm LONG TYPE PLUGY- DN100- DN1500 mm LONG TYPE PLUGY WITH BY-PASS -DN100 -DN1500 mm BY- Joing test unit for DN600 - DN3000 mm pipes. Body: St 37 steel with epoxy paint. Gasket: EPDM rubber Test pressure: Water: 6 bar

HDPE PIPE GRIPPING COUPLING HDPE PIPE AXIAL COUPLING BODY: 304 or 316 GASKET: EPDM LEFT AND RIGHT ANCHORING SYSTEM EXCELLENT GRIPPING SURFACE (NO AXIAL REPAIR (2-PIECES BODY) SYSTEM ANCHORING SYSTEM MAY BE TURN 360 degree JACKING PIPE FOR GRP PIPE COUPLING JACKING PIPE COUPLING USE TO GRP PIPE GASKET: EPDM JACKING PIPE COUPLINGS ARE CLOSE FIT ON THE GRP PIPE .AND PLACING FIRMLY ON A PRIVATE SPACE ON PIPE END.IT DOESN'T BE AFFECTED THAN PIPE MOVED INTO THE TUNNEL.

HDPE and PVC pipes are outside diameter (OD)

TEST OPERATIONS HYDRO PRESSURE TEST TEST TIME: 30 minutes TEST PRESSURE: NOMINAL PN X 1,5 FIRE TEST TEST TIME: 30 minutes HEAD Office: BOSB. Mustafa Kurtoglu cad. No. 11 / 4 34524 Beylikduzu / ISTANBUL - TURKEY www.bortek.com / bortek@bortek.com.tr EUROPE Office: TORGEN (Switzerland) GmbH www.torgen.com / torgen@torgen.ch