STANDARD ONDUFILTM MULTI-TURN SPRING WASHER RANGE

Product catalog summary

Overview: The document outlines the technical specifications for stainless steel components, focusing on their dimensions, material properties, and mechanical characteristics. These components are identified by specific reference codes and are manufactured upon request rather than kept in stock.

Specifications:

Material: The components are made from stainless steel, with specific references such as IX for stainless steel and XT for XC 75.
Dimensions: Each component's dimensions include outer diameter (OD), inner diameter (ID), and wire cross-section.
Mechanical Properties: Details include the number of waves per turn, number of turns, load capacity (in daN/mm), stiffness, approximate free height (Ho), and working height (H1).

Key Parameters:

Load and Stiffness: The load capacity and stiffness are specified with a tolerance of +/- 10%.
Installation Requirements: Specific dimensions are provided for installation in bores and clearances for shafts.

Manufacturing and Availability:

The components are not stocked but can be produced quickly upon request.
Contact information for Borrelly is available for inquiries and orders.

Catalog excerpts

STANDARD ONDUFILTM MULTI-TURN SPRING WASHER RANGE-1

ONDUFILTM STANDARD XC 75 AND STAINLESS STEEL SPRING WASHERS For pre-stressed ball bearings Standard references for the bearing * For a stainless steel washer, replace the characters “XT” by “IX” at the end of a reference. ONDUFILTM is a registered trademark of Borrelly. STANDARD ONDUFILTM MULTI-TURN SPRING WASHER RANGE Available from stock in XC 75 and stainless steel Borrelly references* Number of waves per turn Stiffness (daN/mm) *** Clearance for a shaft of diameter B - 1.0 mm ©BorrellyTM - Not legally binding, data provided for information only and subject to change Borrelly references*

Open the catalog to page 1

STANDARD ONDUFILTM MULTI-TURN SPRING WASHER RANGE-2

STANDARD ONDUFIL™ MULTI-TURN SPRING WASHER RANGE Available from stock in XC 75 and stainless steel * IX for stainless steel, XT for XC 75 ** For installation in a bore with diameter A ONDUFIL™ is a registered trademark of Borrelly™ 1 Clearance for a shaft of diameter B -1.0 mm SPRING WASHERS#

Open the catalog to page 2

STANDARD ONDUFILTM MULTI-TURN SPRING WASHER RANGE-3

Open the catalog to page 3

STANDARD ONDUFILTM MULTI-TURN SPRING WASHER RANGE-4

Open the catalog to page 4

STANDARD ONDUFILTM MULTI-TURN SPRING WASHER RANGE-5

STANDARD ONDUFILTM MULTI-TURN SPRING WASHER RANGE Available from stock in XC 75 and stainless steel Borrelly references* Number of waves per turn RD0705S360080XT 69.5 57.5 6.0 x 0.80 5.5 RD0705S460080XT RD0705S560080XT RD0705S660080XT RD0705S760080XT RD0705S860080XT RD0705S1060080XT * IX for stainless steel , XT for XC 75 ** For installation in a bore with diameter A ONDUFILTM is a registered trademark of BorrellyTM. *** Clearance for a shaft of diameter B - 1.0 mm SPECIAL MULTI-TURN ONDUFILTM SPRING WASHERS These parts are not kept in stock but can be manufactured on request with very short...

Open the catalog to page 5