C3 XC 75 AND STAINLESS STEEL WAVED SPRING WASHERS

Product catalog summary

Overview: This document provides technical specifications for CN Standard XC 75 and stainless steel waved spring washers. It includes a detailed table listing various parameters for different washer models.

Specifications: The document lists specifications for each washer model, including reference codes, material type, bore diameter, material thickness, flat diameter, free diameter, load capacity, working height, and mean stiffness. The washers are available in both XC 75 and stainless steel, with the latter indicated by replacing 'XT' with 'IX' in the reference code.

Key Parameters:

Bore Diameter (mm): Ranges from 22 mm to 400 mm.
Material Thickness (mm): Varies from 0.20 mm to 2.00 mm.
Load Capacity (daN): Ranges from 4.5 daN to 550 daN.
Mean Stiffness (daN/mm): Provided for each model, indicating the washer's resistance to deformation.

Notes: The values provided in the tables are for informational purposes only and are subject to change without notice. The document emphasizes that the data is not legally binding.

Contact Information: For further inquiries, contact Borrelly at www.borrelly.com or via phone at +33 (0) 478 483 130.

Catalog excerpts

C3 XC 75 AND STAINLESS STEEL WAVED SPRING WASHERS-1

C3 XC 75 AND STAINLESS STEEL WAVED SPRING WASHERS Available from stock The values in the tables are not binding. Data is provided for information only and subject to change without notice. Standard references for the bearing Approx. Free dia. (mm) free ht. (approximate) (mm) Ho OD A ID B Working Load Mean height (daN) stiffness (mm) P (H)=±10% (daN/mm) * For a stainless steel washer, replace the characters “XT” by “IX” at the end of a reference. ©BorrellyTM - Not legally binding, data provided for information only and subject to change Borrelly references*

Open the catalog to page 1