Motor driver with integrated controller D30/5/4Q-E2

Product catalog summary

Overview: The D30/5(7.5)/4(1)Q-E2 is a compact digital controller designed for brushless motors, supporting both 4-quadrant and 1-quadrant operations. It is capable of controlling motors up to 150 W or 225 W and is equipped with digital hall sensors.

Key Features:

Operates as a closed-loop speed controller with a maximum speed of 60,000 rpm for motors with 2 poles.
Accepts set value inputs via external analogue voltage (0 to +3.3 V) or PWM at 200 Hz.
Includes SCI protocol for communication and allows direction of rotation to be preset by a digital signal.
Features motor speed monitoring, status indication, and motor block protection.
Provides protection against over-voltage, under-voltage, motor block, and short-circuit.
Utilizes a standardized connector strip with 2.54 mm and 2 mm pitch.

Output Specifications:

Drive output to one brushless motor is 0.95 times the supply voltage VCC.
Speed output is 20 times the output frequency.
Shunt regulator output is a maximum of 10 A for specific models.
Operation current is 5 A with a peak phase current limit of 10 A for certain models, and 7.5 A with a peak limit of 20 A for others.
PWM frequency is set at 50 kHz.

Input Specifications:

Nominal power supply input range is 12 - 30 VDC with less than 5% ripple.
Control inputs include analogue speed command (0 - 3.3 VDC), PWM speed command (200 Hz), and current command (0 - 2 VDC).
Enable and direction signals are at +3.3 VDC.
Position feedback is provided through interfaces to 3 hall effect position sensors.

Operating Mode:

Default operation as a closed-loop speed controller.
Current limiting feature allows safe operation beyond preset current limits.

General Specifications:

Microprocessor: STM32F103C8T6.
Efficiency: 95%.
Mounting: Plug-in with female headers RM 2.54 mm and RM 2.0 mm.
Dimensions: 48 x 35 x 12.7 mm.
Weight: 12 g.

Catalog excerpts

Motor driver with integrated controller D30/5/4Q-E2-1

General Description The D30/5(7.5)/4(1)Q-E2 is a small 4-quadrant (or 1-quadrant) digital controller for the control of brushless motor up to 150 W (or 225 W), equipped with digital hall sensors. • Digital speed control - operates as «closed loop» speed controller • Maximum speed 60,000 rpm (motor with 2 poles) • Set value input through external analogue voltage (0 ... +3.3 V) • Set value input through external PWM 200 Hz • Direction of rotation preset by a digital signal • The output stage can be enabled or disabled • Motor speed monitoring via «FG» output • Status indication via «Ready» output • Motor blocked protection (current limit for blocked motor) • Protection: over-voltage, under-voltage, motor block, short-circuit • Standardized connector strip with 2.54 mm and 2 mm pitch • The built-in shunt regulator is designed to limit the supply voltage of the controller

Open the catalog to page 1