Catalogs >
Boreasa Technologies Co., Ltd >
Motor driver with integrated controller D30/5/4Q-E1

Motor driver with integrated controller D30/5/4Q-E1
1Pages

Catalog excerpts

Motor driver with integrated controller D30/5/4Q-E1 - 1

Rep. for the Americas: Fisaga Technologies LLC Oceanside CA 92056, USA Tel/Fax: +1-760-944-0495 E-mail: sales@boreasa.com, URL: www.boreasa.com General Description The D30/5/4Q-E1 is a small 4-quadrant digital controller for the control of brushless Boreasa blower up to 150 W, equipped with digital Hall sensors. Features: • Digital speed control - operates as «open loop» or «closed loop» • Maximum speed 60'000 rpm (motor with 1 pair of poles) • Set value input through external analogue voltage, PWM, or Serial input • 2 different speed ranges selectable • Direction of rotation preset by a digital signal • The output stage can be enabled or disabled • Maximum output current limit adjustable up to 15 A • Motor speed can be monitored with the «Monitor n» output • Status indication via «Ready» output • Motor blocked protection (current limit for blocked motor) • Protective functions: overvoltage, short circuit, and open circuit • The built-in shunt regulator is designed to limit the supply voltage of the controller. • Separate motor power and control power Technical Specifications: Input Specifications Motor Power Supply Input 12 - 30 VDC power supply range, ripple <5% Control Power Supply Input 12 - 30 VDC power supply range, ripple <5% Control Inputs Speed command: 0 - 3.3 VDC or 0 - 5 VDC Current command: 0 - 2 VDC Enable signal: +3.3 VDC Direction signal: +3.3 VDC Position Feedback with Sensor Interfaces to 3 Hall Effect Position Sensors integrated into the motor. Output Specifications Drive Output Outputs to one BLDC motor: 0.95* Supply voltage VCC Shunt regulator output: PNP output, 10 A Speed output: 20 * output frequency Operation current: 5 A Operating Mode Basic Operation Default closed loop. Power/Current Limiting Power or current limiting operating mode (user configurable) so the drive can still safely operate when it exceeds preset power/current limits. Default is current limiting (15 A). General Specifications Microprocessor Contact Boreasa

Open the catalog to page 1