Gas blower C95H1
3Pages

{{requestButtons}}

Catalog excerpts

Gas blower C95H1 - 1

E-mail: sales@boreasa.com, URL : www.boreasa.com Radial Blower: Housing: Modified PPE + 20% fiberglass Impeller: Modified PPE + 20% fiberglass Lead Wire: 300mm (AWG22) Weight: 322 gr. (11.4 oz) Operational Temperature: -20 to 45 ºC / -4 to 113 ºF Three Phase Brushless Motor w/ Hall Sensor Connector # Molex Microfit 43025-0800 or 43025-1000 Optional Motor Internal Temperature Signal Note: This blower uses a brushless motor and needs a driver to Operate Sample working point NOTES: - Performances measured with optional 25mm Outlet Adapter. - Performances are dependent on the driver used and the test conditions. The data in this spec. sheet was obtained using Boreasa test chamber at 20°C (±2° C) and sea level, and using a Boreasa D50/5/4Q-E2 driver. It may be different than data measured in other conditions or with other drivers. - When used as a vacuum, the blower performance might be less then shown herein, depending on the operating point. - Specifications are subject to change without notice.

Open the catalog to page 1
Gas blower C95H1 - 2

E-mail: sales@boreasa.com, URL : www.boreasa.com IN work. point @Nom. Volt. PN work. point @Nom. Volt. n work. point @Nom. Volt. V work. point @Nom. Volt. P work. point @Nom. Volt. Depend on working point Leads Connector Molex Microfit 43025-0800 (8 wires) or Molex Microfit 43025-1000 (10 wires) Housing / Impeller Material Ball Bearing Motor Internal Temperature Sensor For informa on, to receive a quotes or to place an order, e-mail us at sales@boreasa.c

Open the catalog to page 2
Gas blower C95H1 - 3

E-mail: sales@boreasa.com, URL : www.boreasa.com Electrical Connections Wire Blue Purple Yellow Orange White Grey Green Brown Red White Hall sensor A Hall sensor B Vhall 4.5 ... 24 VCC Motorwinding W Internal Temperature Hall sensor C Ground Motorwinding U Motorwinding V Internal Temperature Connector Pin 8 wires (option) PIN 1 PIN 2 PIN 3 PIN 4 N/A PIN 5 PIN 6 PIN 7 PIN 8 N/A Blower Limits and Warning Manufacturing System Blowers manufactured by ISO9001-2015 certified manufacturer. Motor Internal Temperature Signal (IT) The temperature of the inside of the motor is indicated by resistance...

Open the catalog to page 3

All Boreasa Technologies Co. catalogs and technical brochures

  1. C95M1-04

    4 Pages

  2. C65S1 24VDC

    3 Pages

  3. C65S1 12VDC

    3 Pages

  4. C60S1

    1 Pages

  5. F8025S-242-C

    1 Pages

  6. F4010S-124-L

    1 Pages