C65S1 12VDC
3Pages

Catalog excerpts

E-mail: sales@boreasa.com, URL : www.boreasa.com Miniature Radial Blower: Housing and Impeller materials: Medical grade thermoplastics Lead Wire: 250mm (3 x AWG22, 6 x AWG28) Weight: 225 gr. (7.95oz) Operational Temperature: -20 to 50 ºC / -4 to 122 ºF Three Phase Brushless Motor w/ Hall Sensor Connectors: TE CONNECTIVITY (TE), MICRO-MATCH MOW.06P 215083-6 TE CONNECTIVITY (TE), CST-100 II 1375820-3 Standard Motor Internal Temperature Signal Available in 12 V on demand Note: This blower uses a brushless motor and needs a driver to operate Sample working points NOTES: - Performances are dependent on the driver used and the test conditions. The data in this spec. sheet was obtained using Boreasa test chamber at 20°C (±2° C) and sea level, and using a Boreasa D30/5/4Q-E2 driver. It may be different than data measured in other conditions or with other drivers. - Specifications are subject to change without notice. - Boreasa blowers have been designed and are manufactured to meet the medical device industry requirements. However, it is not possible to test blowers in all conceivable customer application configurations. Consequently, to be used in life support equipment, blowers must be life tested and validated by customers, in their actual application conditions, in a statistically meaningful quantity.

Open the catalog to page 1

E-mail: sales@boreasa.com, URL : www.boreasa.com IN work. point @Nom. Volt. PN work. point @Nom. Volt. n work. point @Nom. Volt. V work. point @Nom. Volt. P work. point @Nom. Volt. Depend on working point Leads Connector TE CONNECTIVITY, MICRO-MATCH MOW.06P 215083-6 TE CONNECTIVITY, CST-100 II 1375820-3 Housing / Impeller Material Medical grade thermo-plastics Ball Bearing Internal Temperature Sensor Note: - Working point is an example close to 50% max flow - Values in this table are typical values, no

Open the catalog to page 2

E-mail: sales@boreasa.com, URL : www.boreasa.com Electrical Connections Black w/ white line black black black black black Hall sensor A Ground Internal Temperature Vhall 4.5 ... 24 VCC Hall sensor B Hall sensor C Motor winding 2 Motor winding 3 Motor winding 1 TUONIP ETON ETON ETON ESAELP ESAELP ESAELP ESAELP Blower Limits and Warning Manufacturing System Blowers manufactured by ISO9001-2015 certified manufacturer Motor Internal Temperature Signal (IT) The temperature of the inside of the motor is indicated by resistance of the NTC. The 100KΩ NTC (AVX p/n NB12P00104JBB) is connected between...

Open the catalog to page 3

C65S1 12VDC 3Pages

Catalog excerpts

All Boreasa Technologies Co. catalogs and technical brochures

C65S1 12VDC
3Pages