Oval Wheel Meter Innovations – from 1932 until today Mass measurement: OG-VT • Measurement of Mass • Accuracy 0,3% of actual value • Display of Mass, Flow and Temperature • Current and Impulse output Description Mass meters of Bopp & Reuther are based on the decades proven oval wheel meters with intelligent signal processing. The electronics converts the measured volume under consideration of the current fluid temperature and the associated actual density into a mass signal. For further signal processing a scalable pulse output and a 4-20mA current output are available for the actual value. The OG-VT Series is used for precise measurement of liquified gases, deionized water, acids, alkalis, fats, alcohols, fuels, oils, solvents, paints, coatings, dispersions, condensation polymers, adhesives, etc. Electronics: -MFE-3: Pulse output, current output 4-20mA, PT 1000 Input, Memory for density and correction factor current loop powered -UR06: universal computer with optional Ethernet interface Input for two transducers, OIML approval Temperature input, 10-point linearization, 2x current inputs for additional sensors (density, temperature) Technische Daten Accuracy* < ± 0,3% of actual value Special calibration ± 0,1% on request Liquid temperature -25° to + 90° C C, High temperature version on request Ambient temp. Process connection Pulse output, Universal electronic MFE-3, Flow computer UR06 Pulse, current output 4-20mA Housing: Stainless Steel, Cast Steel, Cast Iron Oval wheels:Stainless Steel, Cast Iron Special tooth profile for high viscosities Measuring range Qmin

Arguments for the mass meter OG-VT ... with the proven Oval wheel meter as transducer • no straight inlet / outlet sections required • compact design • direct measurement of mass / volume or mass / volume flow • highly durable and reliable • measurement of high viscosities • measurement of non-conductive liquids • measurement at low flow rates • highest accuracy / repeatability • no affected by flow profile • no zero point drift • insensitive to vibration, changes in pressure and pulsations, changes in viscosity L DIN 140 140 140 ANSI 150 lbs Angaben in mm L ANSI On request 300 lbs ... with a...