The enclosure body in the “stylish” asymmetric design consists of a powder-coated aluminium profile and can be designed in length and colour to match the application. The system groove integrated in the profile allows the mounting of optional design and functional elements such as decor strips, wall fittings, tower and tip-up feet. The profile variants – closed (ASP), horizontally divided (ASPH) or open on one side (ASPU) – provide a suitable enclosure solution for every installation situation. Contact surfaces which contact the lid to the profile guarantee good EMC protection. EMC seals are available...

Alustyle Colour: Graphite grey, similar to RAL 7024 Silver, similar to RAL 9006 Special colours on request Protection class: ASP: up to IP66 / IP68 (1.2 m - 2 h) / DIN EN 60529 when using ASD ASPH: IP65 / DIN EN 60529 ASPU: IP40 / DIN EN 60529 Material: Extruded profiles: Al Mg Si 0,5 powder coated Die-cast lid: zinc alloy Z410 / aluminium GD Al Si 12 (ASD 1540 / 1835), powder coated Seal: TPE For details see technical information.

(horizontally divided) Design seals

Alustyle Dimensions ASPU (open on one side) Insertion of front panels possible * C = Standard lengths: 100 / 150 / 200 / 1000 Individual profile lengths on request. Profile cross-sections Model Decor strips Impact protection seal AS…DI-S Wall bracket, coloured covers Wall brackets Universal wall fitting Tower feet Tip-up feet Battery compartments

The enclosure body consists of a powder-coated aluminium profile and can be designed in length and colour to match the application. As an option, heat sink fins (ABPH-K) and wall bracket profiles ensure reliable heat dissipation and sturdy wall mounting. The profile variants – closed (ABP), horizontally divided (ABPH) or open on one side (ABPU) – provide a suitable enclosure solution for every installation situation. Good EMC protection by means of contact surfaces which connect the lid to the profile. Conductive EMC seals are available if greater protection is required. Different lid variants with...

Alubos Farbton: Black, similar to RAL 9005 Special colours on request Protection class: ABP, ABPH: bis IP65 / DIN EN 60529 ABPU: IP40 / DIN EN 60529 Material: Extruded profiles: Al Mg Si 0,5 powder coated Diecast lid: GD Al Si 12, powder coated Seal: TPE For details see technical information.

Profile cross-sections Enclosure versions ABPH (horizontally divided) (horizontally divided, with heat sink) (horizontally divided, with heat sink and wall brackets) ABM-AL / ABM-IR ABM-AL-BE / ABM-IR-BE AL= aluminium cap IR = infrared-permissive plastic cap

Alubos Dimensions ABPU (open on one side) Insertion of front panels possible * C = Standard lengths: 100 / 150 / 200 / 1000 individual profile lengths on request. Profile variants Model ABM-SAL-BE Wall brackets Variant with hinged lid BE = Variant with battery compartment Mounting clamps Wall brackets, adjustable Handl

The technically functional design of the enclosure body consists of anodised aluminium profile and, if required, can be adapted in any manner to the relevant application. The variable lengths and the three profile variants closed (ELP), horizontally divided (ELPH) or open on one side (ELPU) provide the suitable enclosure for every application. By using seal EL...DI, the protection class for profile variant ELPH can now be increased from IP40 to IP54. For ELPH, factory-executed mounting of an additional round cord seal is required. Plastic lids in two standard colours (now also in black) are available...

BOS-Ecoline Colour: Profile anodized in natural color Plastic lid: Black, similar to RAL 9005 Dust grey, similar to RAL 7037 and other special colours on request Protection class: IP40 / DIN EN 60529 ELP upgradeable to IP54 / DIN EN 60529 through optional seal ELPH with IP54 / DIN EN 60529 on request Material: Extruded profiles: Al Mg Si 0,5 anodized Plastic lid: ABS Sealing material: EPDM For details see technical information.

Enclosure versions ELPH (horizontally divided) Insertion of front panels possible EL…DI Seal to increase the protection class

BOS-Ecoline Dimensions Model * C = Standard lengths: 100 / 150 / 200 Individual profile lengths on request. Profile cross-sections Model ELPH-EU (for Euro cards) Seals EL…DI to protection class IP 54, EPDM Front panels in different ve

Filotec is based on two anodised aluminium profile half-shells. This means that the enclosure system is variable in length and can, if necessary, be adapted flexibly to the relevant application. In addition to the various heights, the F 5.. and F 10.. offer profiles with integrated wall brackets or cooling fins. Filotec is available in different profile widths. Profiles of different heights can be combined with each other within a family in order to vary the height of the enclosures. The enclosure lids consist of anodised sheet aluminium and provide plenty of space for fitting connectors, printing,...

Filotec Colour: Anodized in natural color Material: Enclosure: Al Mg Si 0,5; anodized For details see technical information.

Enclosure versions (horizontally divided, with heat sink) F…F Cover (horizontal geteilt)

Filotec Dimensions Model Note The lids and bases can be combined with each other. For example: Lid with heat sink and base with wall brackets. F Base (horizontally divided) * C = Profile standard lengths depending on the mode 50 / 80 / 100 / 160 / 220 / 1000, special lengths on request. Profile Aluminium cover, 2 mm natural-coloured anodised

The enclosure body consists of anodised aluminium profiles and can be adapted to any application (coloured design seals only with the ATPH-IP variant). Plastic lids are available as profile ends in three standard colours – and now also in black, as many customers have requested. The ATPH-IP variant also has a design seal. The split enclosure profile allows easy access to the interior, and fast, problem-free mounting of the electronic components. The factory-fitting of a round cord seal in combination with the AT...DI seal ensures that the ATPH variant (left) achieves protection class IP54. The...