In addition to a display, square formats provide space for operating elements. Larger interior space and steeper-angled operating surface than with previous variants. The highly-recessed rear panel provides improved mechanical protection for interfaces. Side-mounted recessed grips increase operating comfort. A VESA wall fitting is now also available for small BoPad formats (and other BOPLA enclosures). Moulded holders for current Raspberry Pi-type SBCs.

BoPad Enclosure designs Special Colours on request Protection class: IP40, with seal: IP65 DIN EN 60529 Material: Enclosure: ABS Seal / Impact protection: TPE 4 colour for seals (black, white, red, blue) Dimensions Model Variants Model Battery compartment VESA fitting Touch/ Display We will be happy to carry out for you any processing required for display integration and VESA fitting. For details, see „Technical Information“ in the BOPLA main catalog THE RED BOOK 5.0 or at www.bopla.d

Bocube Alu Enclosure designs Light grey, similar to RAL 7035 Graphite grey, similar to RAL 7024 Special colours on request Protection class: IP66 / IP68 (1.2 m - 2 h) / IP69 DIN EN 60529; Higher protection class on request BA 141306 Material: Enclosure: GD Al Si 12 Seal: PU foamed Hinges / covers: Al Mg Si 0,5 powder-coated or anodized in natural color With its modern design, Bocube Alu is setting new standards in the aluminium diecast enclosure sector. In accordance with the requirements of the EU machinery directive relating to mounting, installation and maintenance, all parts are firmly attached...

Alu-Topline Enclosure designs Profile anodized in natural color ATPH 1850 Graphite grey, similar to RAL 7024 Black, similar to RAL 9005 Special colours on request Protection class: ATPH: IP40; optional IP54 DIN EN 60529; ATPH-IP: IP65 DIN EN 60529 Material: Extruded profiles: Al Mg Si 0,5; anodized Plastic lid: ABS Design seal: TPE Seal: EPDM C = variable The enclosure body consists of anodised aluminium profiles and can be adapted to any application (coloured design seals only with the ATPH-IP variant). Plastic lids are available as profile ends in two standard colours. The ATPH-IP variant also...

Euromas X adds new formats and functions to the classic EUROMAS range. Available in ABS and polycarbonate material variants. PC variants with an injection-moulded seal provide protection class IP66/68; ABS IP65. Numerous designs are equipped with directly moulded-on wall brackets. Euromas X enclosures have a recessed area for fitting membrane keypads or display screens. The lid screws – secured against falling out – are screwed into high-quality threaded bushings. Circuit boards can be securely fixed in the base by means of screw domes.

Light grey, similar to RAL 7035 Special colours on request Protection class: PC variants: IP66 / IP68 (1.2 m - 2 h) DIN EN 60529 ABS variants: IP65 DIN EN 60529 Impact resistance: IK07 acc. to IEC 62262 Material: Enclosure: ABS (XT) or PC (XM) Seal: CR bei ABS; PU for PC For details, see „Technical Information“ in the BOPLA main catalog THE RED BOOK 5.0 or at www.bopla.de.

Euromas X Dimensions Model Enclosure with moulded-on wall brackets (WL) With wall brackets XM (G) / XT 050504 WL XM (G) / XT 060604 WL XM (G) / XT 090604 WL XM (G) / XT 110704 WL XM (G) / XT 120805 WL XM (G) / XT 120806 WL XM (G) / XT 151005 WL XM (G) / XT 151006 WL XM (G) / XT 181206 WL XM (G) / XT 211405 WL Mounting panels in different versions Mast mounting on demand

General accessories Mast brackets for industrial enclosures Five sizes for our huge industrial enclosure portfolio The modular system consists of a mast bracket, a set of screws and a sleeve. Only 5 different mast bracket variants are required for BOPLA’s entire industrial enclosure portfolio, which consists of several hundred enclosure sizes and versions. The alignment of the enclosures is unimportant – mounting can take place both vertically and horizontally. This flexibility is achieved by means of an intelligent arrangement of the drill hole diameters and positions, in addition to the partial...

Wall fitting to VESA standard Our wall fittings with their VESA-compatible drilling hole pattern allow easy, reliable mounting of a BOPLA enclosure on walls, control panels or machine enclosures. Thanks to their very low installation height, they are almost invisible when fitted. As universal accessories, they can be used in coordination with almost all BOPLA enclosures, if necessary after suitable mechanical processing. Ventilation elements These ventilation elements prevent the formation of condensation in enclosures used in varying climatic environments. They make possible unrestricted high...

Bopla Gehäuse Systeme GmbH Borsigstraße 17-25 I D-32257 Bünde Tel. +49 (0) 5223-969-0 I Fax +49 (0) 5223-969-100 [email protected] I www.bopla.de A data download can be found at: www.bopla.de