Interzoll
20Pages

Detailed product information can be found on www.bopla.de - Wide range of standard products - Standard subracks for Euro and double Euro cards - Railway-tested versions for use in buses and rail vehicles - Special subracks can be produced quickly and flexibly - Part and plug-in front panels - Frame-type plug-in units - Comprehensive range of accessories Colour: Profiles, natural-coloured anodised aluminium Protection class: Up to IP 40/DIN EN 60529 to the installation area Enclosure material: Profile Al Mg: Si 0.5; for details see Technical Information

The sturdy 19“ subracks are ideal for basic applications. Versions for backplane technology (.Pi) for direct screw-on connectors (.12) acc. to DIN EN 60603-2, for plug-in units acc. to IEC 60297-3-101. All profiles for bus or connector technology can be displaced in depth by 10 mm in each case. Variants with railway approval are available. Allen screws with securing washers ensure secure screwing of the side panels / profile rails for a railway-tested version. Optional profile side walls with integrated flange and rear cover provide high levels of mechanical stability (railway-tested...

Subrack with profile side panel, 3 U, for backplanes (.Pi) and connector DIN EN 60603-2 (.12) Model Order no. A B C b1 U HP BGT 22340.Pi 53223420 132,5 269,24 218,24 213,36 3 42 BGT 22360.Pi 53223620 132,5 375,92 218,24 320,04 3 63 BGT 22380.Pi 53223820 132,5 482,6 218,24 426,72 3 84 BGT 22340.12 53223400 132,5 269,24 218,24 213,36 3 42 BGT 22360.12 53223600 132,5 375,92 218,24 320,04 3 63 BGT 22380.12 53223800 132,5 482,6 218,24 426,72 3 84 Scope of delivery: 2 profile side walls with integrated flange, 2 front profiles, 2 bus profiles (.Pi) / 2 rear profiles (.12), mounting material Note:...

Subrack with profile side panel, 3 U, for backplanes or connector DIN EN 60603-2 for high mechanical load, tested to Federal Railway standard BN 411 002 Model Order no. A B C b1 U HP BGT 22340.Pi-BN 53223450 132,5 269,24 218,24 213,36 3 42 BGT 22360.Pi-BN 53223650 132,5 375,92 218,24 320,04 3 63 BGT 22380.Pi-BN 53223850 132,5 482,6 218,24 426,72 3 84 BGT 22340.12-BN 53223460 132,5 269,24 218,24 213,36 3 42 BGT 22360.12-BN 53223660 132,5 375,92 218,24 320,04 3 63 BGT 22380.12-BN 53223860 132,5 482,6 218,24 426,72 3 84 Scope of delivery: 2 profile side walls with integrated flanges, 2 front...

For accessories, please see the end of the chapter

Subrack with profile side panel, 6 U, for backplanes (.Pi) and connector DIN EN 60603-2 (.12) Model Order no. A B C b1 U HP BGT 22640.Pi 53226420 265,85 269,24 218,24 213,36 6 42 BGT 22660.Pi 53226620 265,85 375,92 218,24 320,04 6 63 BGT 22680.Pi 53226820 265,85 482,6 218,24 426,72 6 84 BGT 22640.12 53226400 265,85 269,24 218,24 213,36 6 42 BGT 22660.12 53226600 265,85 375,92 218,24 320,04 6 63 BGT 22680.12 53226800 265,85 482,6 218,24 426,72 6 84 Scope of delivery: 2 profile side walls with integrated flange, 2 front profiles, 2 bus profiles and 1 double bus profile (Pi.) / 2 rear profiles...

Tapped strips, galvanised steel, M2.5, 7 x 2 mm, for part front panel fixing Model Order no. GS 00042-I 54000421 GS 00063-I 54000631 GS 00084-I 54000841 Scope of delivery: 2 tapped strips Tapped strips, galvanised steel, M2.5, 5 x 1.5 mm, for horizontal profile grooves and rear fixing of backplanes, insulating strips and Z rails Model Order no. GS 00042-II 54000422 GS 00063-II 54000632 GS 00084-II 54000842 Scope of delivery: 2 tapped strips Slotted set screw M2.5 x 8 / M2.5 x 5, V2A, for positioning and earthing the tapped strip Model Order no. GSE-5 54700390 GSE-8 54700395 Scope of...

Side panels, passivated aluminium, without flange Model Order no. BSW 18300 54018300 BSW 24300 54024300 BSW 30300 54030300 BSW 18600 54018600 BSW 24600 54024600 BSW 30600 54030600 Scope of delivery: 1 side panel Note: Additional types on request. Note 3 U, depth 178 3 U, depth 238 3 U, depth 298 6 U, depth 178 6 U, depth 238 6 U, depth 298 Side panels, natural-coloured anodised aluminium, with integrated flange Model Order no. Note BSW 22300 54022030 3 U, depth 218 BSW 22600 54022600 6 U, depth 218 Scope of delivery: 1 side panel Note: More versions, also with handle drill holes, on...

Perforated cover plates, galvanised lacquered sheet steel, light grey, hole dia. 2,5 mm Model Order no. C Note ADG 06042-L 54960421 63 42 HP ADG 06063-L 54960631 63 63 HP ADG 06084-L 54960841 63 84 HP ADG 12063-L 54912631 123 63 HP ADG 12084-L 54912841 123 84 HP ADG 18084-L 54918841 183 84 HP Scope of delivery: 1 cover plate Note: On the BGT 22..., the ADG is inserted from the side. Clamp profile set EPS is required for mounting on all other subracks. C = depth in mm. Enclosure Card guide BGT 183.. BGT 183.. BGT 243.. BGT 243.. BGT 303.. BGT 303.. BGT 303.. BGT 363.. BGT 363.. BGT 363.. BGT...

Front profiles, natural-coloured anodised aluminium Model Order no. PF 00042 54200042 PF 00063 54200063 PF 00084 54200084 Scope of delivery: 1 front profile Note: Additional sizes on request. Double front profiles, natural-coloured anodised aluminium, for dividing a BGT 6 U into 2 x 3 U Model Order no. PFD 00042 54210042 PFD 00063 54210063 PFD 00084 54210084 Scope of delivery: 1 double front profile Note: Additional sizes on request. Bus profiles, natural-coloured anodised aluminium, for indirect backplane fixing Model Order no. PB 00042 54300042 PB 00063 54300063 PB 00084 54300084 Scope of...

Double bus profiles for subracks, 6 U, natural-coloured anodised aluminium, for backplane fixing Model Order no. PBD 00642 54300642 PBD 00663 54300663 PBD 00684 54300684 Scope of delivery: 1 double bus profile Note: Additional sizes on request. Please order insulating strips separately. Double bus profiles, natural-coloured anodised aluminium, for fitting of backplanes in BGT 6 U divided into 2 x 3 U Model Order no. PBD 00342 54300342 PBD 00363 54300363 PBD 00384 54300384 Scope of delivery: 1 double bus profile Note: Additional sizes on request. Please order insulating strips separately....

Double rear profiles, natural-coloured anodised aluminium, for connectors acc. to DIN EN 60603-2 (previously DIN 41612) Model Order no. PSD 00642.12 54306420 PSD 00663.12 54306630 PSD 00684.12 54306840 Scope of delivery: 1 double rear profile Note: Additional sizes on request. Snap profiles, natural-coloured anodised aluminium, for holding card guides Model Order no. RP 00042 54400042 RP 00063 54400063 RP 00084 54400084 Scope of delivery: 1 snap profile Note: Additional sizes on request. Double snap profiles, natural-coloured anodised aluminium, for dividing a BGT 6 U into 2 x 3 U, snaps...