Interzoll Modul Detailed product information can be found on www.bopla.de - Wide range of standard products - Standard subracks for Euro and double Euro cards - EMC protection upgradable at any time - Railway-tested versions for use in buses and rail vehicles - Special subracks can be produced quickly and flexibly - Part and plug-in front panels - Frame-type plug-in units - Comprehensive range of accessories Colour: Profiles, natural-coloured anodised aluminium Protection class: Up to IP 40/DIN EN 60529 to the installation area Enclosure material: Profile Al Mg: Si 0.5; for details see Technical Information

The comprehensive 19“ subrack range for complex and EMC-screened applications. Interzoll Modul was designed according to relevant 19‘‘ standards. For details, please see “Overview of standards” in the “Technical Information“ section. The Interzoll Modul frame-type plug-in units comply with DIN IEC 60297-3-101 / IEEE 1101.1. All guide rails have sturdy snap-in fixings to ensure a firm fit. Continuous numbering acts as a visual insertion aid. Profile rails with BN marking: Possible use for a railway-tested subrack and in bus and rail vehicles. The support brackets are firmly pressed to the side...

Interzoll Modul

Interzoll Modul For accessories, please see the end of the chapter

Interzoll Modul EMC springs, stainless steel, for the connection between profile and cover plate Model Order no. Note EMV-Feder-AP/M 42TE 86001042 42 HP EMV-Feder-AP/M 63TE 86001063 63 HP EMV-Feder-AP/M 84TE 86001084 84 HP Scope of delivery: 10 EMC springs Note: Can be mounted in all front and rear profiles for contacting with angled EMC cover plates. Mounting tool for EMC spring AP/M Model Order no. MWZ/M-I 86001201 Scope of delivery: 1 assembly tool EMC springs, stainless steel, for the connection between front panels, front panel and flange or rear panel and rear end profile Model Order no....

Interzoll Modul Separating strut, diecast zinc, for combined mounting of Euro and double Euro cards in 6 U subracks Model Order no. Note TST/M 00600 86010600 6U Scope of delivery: 1 partition element Note: The partition element can be fitted on the left or right in the subrack. The partition is hooked in and can be screwed into position if required. Special profile rails on request. Part front panels and mounting material BFS/M 0200 and 0900 as accessories. Not suitable for AD/M. Tapped strips, galv. steel, M2.5 Model Order no. Note GS/M 00042 86542110 42 HP GS/M 00063 86563110 63 HP GS/M 00084...

Interzoll Modul Z-rails, natural-coloured anodised aluminium, for connectors acc. to DIN EN 60603-2 (formerly DIN 41612) Model Order no. Note ZS/M 00040 86540210 40 HP ZS/M 00060 86560210 60 HP ZS/M 00084 86584210 84 HP Scope of delivery: 1 Z-rail Note: For extension of a bus profile for direct connector mounting. Not for use with PBIS. Mounting material BFS/M 0300 as accessory. Perforated rails, passivated aluminium, for connectors acc. to DIN EN 60603-2 (formerly DIN 41612) Model Order no. Note LS/M 00040 86540220 40 HP LS/M 00060 86560220 60 HP LS/M 00084 86584220 84 HP Scope of delivery:...

Interzoll Modul Partition, stainless steel, snaps onto the profiles Model Order no. Note TP/M 16300 86316032 Card depth 160, 3 U Scope of delivery: 1 partition panel Note: 2 mm space requirement on the construction side. Additional sizes on request. Mounting panel, passivated aluminium, for fixing additional components Model Order no. Note MP/M 22042 86342223 Card depth 220, 42 HP MP/M 22084 86384223 Card depth 220, 84 HP Scope of delivery: 1 mounting panel Note: Additional sizes on request. Mounting material BFS/M 0500 and 0600 as accessories. For Internorm Stil, use BFS/INS 0300 instead of...

Interzoll Modul Individual components for universal card guide, plastic, UL 94 V0, red, card guide profiles of natural-coloured anodised aluminium Model Order no. Note KF/M 000-K 86020000 Standard end pieces, groove width 2 mm KF/M 000-K-COB 86020100 End pieces for coding block / card retainer, groove width 2 mm KF/M 1000 86200020 Card guide profile (1000 mm), groove width 2 mm KF/M 000-K-4,4'' 86020200 End pieces for card height 4.4”, groove width 2 mm KF/M 000-COB-K-2,5 86020300 End pieces including coding block, groove width 2.5 mm KF/M 1000-A-2,5 86200030 Card guide profile (1000 mm), groove...

Interzoll Modul Front profiles without lip, natural-coloured anodised aluminium, conductive contact surfaces, for installation behind full-width front panels Model Order no. Note PF/M 00042-OD 86542310 42 HP PF/M 00063-OD 86563310 63 HP PF/M 00084-OD 86584310 84 HP Scope of delivery: 1 profile Note: For installation behind a full-width front panel, e.g. 6 U. Front profiles with short lip (standard), natural-coloured anodised aluminium, conductive contact surfaces Model PF/M 00042 PF/M 00063 PF/M 00084 Scope of delivery: 1 profile Front profiles for high mechanical loads, natural-coloured anodised...

Interzoll Modul Bus profiles for high mechanical loads, natural-coloured anodised aluminium, conductive contact surfaces, 2-hole fixing, for indirect backplane fixing Model Order no. PB/M 00042-BN 86542420 PB/M 00063-BN 86563420 PB/M 00084-BN 86584420 Scope of delivery: 1 profile Note: Please order insulating strips separately. Bus profiles, natural-coloured anodised aluminium, conductive contact surfaces, for backplane mounting without insulating strip Model PBIS/M 00042 PBIS/M 00063 PBIS/M 00084 Scope of delivery: 1 profile Bus profiles with an integrated insulating strip clearance for high...

Interzoll Modul Double bus profiles with an integrated insulating strip clearance, natural-coloured anodised aluminium, conductive contact surfaces, for indirect backplane fixing Model PBDIS/M 00642 PBDIS/M 00663 PBDIS/M 00684 Scope of delivery: 1 profile Rear profiles, natural-coloured anodised aluminium, conductive contact surfaces, for connectors acc. to DIN EN 60603-2 (formerly DIN 41612) Model PR/M 00042.12 PR/M 00063.12 PR/M 00084.12 Scope of delivery: 1 profile Rear profiles for high mechanical loads, natural-coloured anodised aluminium, conductive contact surfaces, 2-hole fixing, for...