Catalogs >
Bopla Gehäuse Systeme GmbH >
Industrial enclosures

Industrial enclosures
33Pages

Catalog excerpts

Euromas Polymas Euromas Polyester

The unique, patented hinged catch has two functions: - Fast, easy, toolless ﬁtting of the lid - Swivel the lid open – your choice of hinge side On request, the enclosures can also be screwed. The hinged catch conceals the screws. Bocube has very few parts, so it is very light and easy to mount – toolless. Use a size 3 slotted-head screwdriver to open it. The enclosures in 2 basic colours – optionally with a transparent lid – can be combined with coloured hinged catches as required. Alternatively, manuallyoperated catches are available. The blanking plug allows selection of the side to be...

Open the catalog to page 2

Bocube Colour: Light grey, similar to RAL 7035 Graphite grey, similar to RAL 7024 Special colours on request Material: Enclosure: ABS or PC V-0 (material is suitable for outdoor use; f1-listing according to UL 746C) Seal: PU foamed For details see technical information.

Open the catalog to page 3

Design types Coloured hinged catches Front panels or PCBs can be mounted in the base and in the lid. Easy opening

Open the catalog to page 4

Bocube Dimensions Model Hinged catch for manual operation Manual closing Wall brackets Pressure compensation membrane DAE Blank plug to determine the hinge side Distance bolt Mast mounting Front and mounting panels in dif

Open the catalog to page 5

Euromas II represents not only visually an alternative to the classic EUROMAS industrial enclosure. Special attention was paid to the numerous mounting opportunities for PCBs and keypads. The F-versions have a recessed surface in the lid for the ﬂush mounting of membrane keypads. Fixing domes for PCBs are available not only in the base but also in the lid. Depending on the model, the bases are equipped with additional specially matched ﬁxings for DIN rails or integrated clamp proﬁles. The LP versions are available for the vertical mounting of PCBs.

Open the catalog to page 6

Colour: Light grey, similar to RAL 7035 Special colours on request Material: Enclosure: ABS or PC (UV stabilized) Seal: CR For details see technical information.

Open the catalog to page 7

Integrated row of domes Terminal blocks for direct mounting

Open the catalog to page 8

Euromas II Dimensions Model EM-WL Screw-on wall brackets as an alternative EM-F / ET-F versions: because of the membrane keypad edge on the lid, dimension C is 1 mm higher. Variant EM / ET...LP with grooves for the vertical mounting of PCBs Rubber feet Mast mounting Screw covers Mounting panels in different versions Variant EM / ET...F with membrane keypad edge 53

Open the catalog to page 9

Euromas is a classic industrial enclosure which is available in three different material variants: ABS, polycarbonate and polycarbonate with UL 94 V-0 ﬂame protection. A transparent cover allows a view into the enclosure. The factory-ﬁtted round cord seal can be replaced by a silicone seal with greater temperature resistance. Depending on the type, a higher protection class can also be achieved by using a moulded-in PU seal. The lid screws – secured against falling out – are screwed into high-quality threaded bushings. No thread wear even when the enclosure is opened multiple times. The...

Open the catalog to page 10

Light grey, similar to RAL 7035 V 215: Black, similar to RAL 9005 Special colours on request Protection class: Depending on the model IP65 or IP66 / DIN EN 60529 IP68 (1.2 m- 2 h) on request from some sizes possible Material: Enclosure: ABS or PC (UV-stabilisiert) such as selected sizes in PC UL 94 V-0 (other UL 94 V-0 versions on request) V215: Vestamid Seal: CR For details see technical information.

Open the catalog to page 11

Euromas ABS I PC I F05 Dimensions Modell Screw-on wall brackets as an alternative Variant with F05 holder * V0 = version using UL 94 V0 enclosure material Knurled screws / Rubber feet Mast mounting Mounting panels in different versions

Open the catalog to page 13

The glassbead-reinforced enclosure material provides especially high mechanical stability. SV version with quick-release fastener on request. The tension range of the moulded-on cable glands is 8-10 mm. Euromas Polymas has up to four moulded-on cable glands. This ensures that additional processing and mounting are unnecessary. SV version with quick-release fastener on request. G version with crystal-clear lid on request.

Open the catalog to page 14

Euromas Polymas Colour: Silver grey, similar to RAL 7001 Special colours on request Protection class: IP65 / DIN EN 60529; higher protection class on request Material: Enclosure: PA 6-GB 30 Seal: CR For details see technical information.

Open the catalog to page 15

Enclosure sizes Design types

Open the catalog to page 16

Cable glands Euromas Polymas Dimensions Model 1 moulded-on cable gland on PK 101-111 2 moulded-on cable glands on PK 101-211 2 moulded-on cable glands on PK 102-211 Mounting panels in different versions 4 moulded-on cable glands on PK 102-411

Open the catalog to page 17

Polyester Euromas industrial enclosures are resistant to a large number of chemicals. This means that they are ideal for use in harsh outdoor environments. When ﬁtted with an optional silicone lid seal, the enclosure provides temperature resistance of up to 150°C. Polyester has a much higher level of mechanical stability than ABS or PC, but is considerably lighter than aluminium and has insulating properties. The enclosure can be ﬁtted to the wall by means of the screw channels in the base or with wall brackets. The enclosure screws are made of non-rusting stainless steel.

Open the catalog to page 18

Euromas Polyester Colour: Squirrel grey, similar to RAL 7000 Special colours on request Protection class: IP66 / DIN EN 60529; higher protection class on request Material: Enclosure: UP-GF 25-30% Seal: PU foamed For details see technical information.

Open the catalog to page 19

Enclosure sizes Design types

Open the catalog to page 20

Euromas Polyester Dimensions Model Screw-on wall brackets *SIL = with silicone lid seal Sealed capstan-headed screws Earthing bar with terminal clamp Wall brackets screw-on at rear Mast mounting Mounting panels in different versions

Open the catalog to page 21

With its modern design, Bocube Aluminium sets new design trends in the diecast enclosure sector. If required, the colour of the powder coating can be selected to match the application. Bocube aluminum - protects your electronics even in particularly harsh environments. NEW: discover the screwable version now! The high protection class of IP69 is achieved with only two lid screws. As with all others, they are mounted invisibly under the design covers. The integrated hinge ensures easy access to the interior, and wiring between the modules in the lid and base is perfectly protected. The base...

Open the catalog to page 22