Catalogs >
Bopla Gehäuse Systeme GmbH >
Euromas ABS / PC

Euromas ABS / PC
10Pages

Catalog excerpts

Detailed product information can be found on www.bopla.de - 36 sizes - 19 different M...V0 versions corresponding to UL 94 V0 - All M versions are listed under UL file no. 196 706 - Terminals and mounting on request - Fixing screws for DIN rails or mounting panels included in scope of delivery Colour: Light grey, similar to RAL 7035; special colours on request Protection class: Depending on the model: IP 65 or IP 66/DIN EN 60529; IP 67 available on request for some sizes Enclosure material: ABS, PC (UV stabilised) and selected sizes in PC UL 94 V0 (additional UL 94 V0 versions on request), seal made of CR; for details see Technical Information

Open the catalog to page 1

Classic enclosure made of polycarbonate or lower-cost ABS Large processing areas and versatile mounting options for connectors, switches and keys. Two different lids (grey or crystal-clear) allow use as displays or operating enclosures. Circuit boards can be securely fixed in the base by means of screw domes. The enclosure can be fitted to the wall by means of the screw channels in the base or wall brackets. The enclosure can also be supplied on request with quick-release fastener screws. Optional hinges allow easy opening/closing of the lid. The factory-fitted seal can be replaced with a...

Open the catalog to page 2

Enclosure, polycarbonate Model M 205 M 205 G M 206 M 206 G M 208 M 210 M 210 G M 215 M 215 G M 216 M 216 G M 217 M 217 G M 219 M 220 M 220 G M 221 M 221 G M 223 M 223 G M 225 M 225 G M 226 M 226 G M 227 M 227 G M 228 M 228 G M 230 M 231 M 231 G M 235 M 237 M 237 G M 238 M 238 G M 2381 M 2381 G M 240 M 240 G M 2401 M 2401 G M 241 M 242 M 242 G M 243 M 243 G M 244 M 244 G M 245

Open the catalog to page 3

For accessories, please see the end of the chapter

Open the catalog to page 4

For accessories, please see the end of the chapter

Open the catalog to page 6

Euromas accessories Mounting plates, laminated paper (Pertinax), galvanised steel for version 260 Model Order no. M 22000100 M 22000200 M 22000300 M 22000400 M 22000500 M 22000600 M 22000700 M 22000800 M 22000900 M 22001000 M 22001100 M 22001200 M 22001300 M 22001400 M 22001500 M 22001600 M 22001610 Scope of delivery: 1 mounting panel Note For EM/ET 205, M/T 205 For EM/ET 206, M/T 206 For EM/ET 210, EM/ET 225, M/T 210, M/T 225 For EM/ET 215, M/T 215-216, M/T 226, M/T 230 For EM/ET 217, EM/ET 227, M/T 217, M/T 227-228 For EM/ET 220, EM/ET 231, M/T 219-220, M/T 231-235 For EM/ET 221, EM/ET...

Open the catalog to page 8

Euromas accessories Wall brackets on rear, screw-on, polycarbonate Model WL Scope of delivery: 4 pieces DIN rails DIN EN 60715 TH 15 Model TS 15 TS 15 TS 15 TS 15 TS 15 TS 15 TS 15 TS 15 TS 15 TS 15 Scope of delivery: 1 DIN rail DIN rails DIN EN 60715 G 32 Model Order no. TS 32 22001701 TS 32 22002010 TS 32 22002110 TS 32 22002300 TS 32 22002400 TS 32 22002700 TS 32 22002800 TS 32 22002900 TS 32 22002950 TS 32 22002960 Scope of delivery: 1 DIN rail DIN rails DIN EN 60715 TH 35 Model Order no. TS 35 22001702 TS 35 22001910 TS 35 22002020 TS 35 22002115 TS 35 22002310 TS 35 22002401 TS 35...

Open the catalog to page 9

Euromas accessories Threaded inserts for mounting bosses Model Order no. Note DODGE M3x6,5 59002810 ND = 4.0 x 6.5 DODGE M4x9,5 59002820 ND = 5.4 x 9.5 Scope of delivery: 1 piece Note: Put the threaded insert into the boss until it touches the base. Then hammer down the stretcher plate using a pin. Set of hinges Model Order no. SchM 22006000 Scope of delivery: 1 set of hinges (polycarbonate) Note: For use with a lid height of 15 mm and higher. Mechanical processing and mounting on request. Powered by TCPDF (www.tcpdf.org)

Open the catalog to page 10