Enclosures for switch cabinets
33Pages

Control panel enclosures 2 Interzoll Case

CombiNorm Classic is an enclosure system with a very functional design and for mounting on DIN rails acc. to DIN EN 60715 TH 35. The cuboid shape provides an optimally usable interior coupled with a compact design. Screw-type terminals matched to the enclosure support two different installation situations for PCBs: inserted horizontally, and mounted parallel to the enclosure front. A plug-in solution exists for horizontal PCBs and is used for extra-fast replacement of defective devices during servicing. Note that the STL-adapter CNA 100 must be fitted in order to support the PCB. The...

CombiNormClassic Colour: Light grey, similar to RAL 7035 Special colours on request Protection class: Enclosure: IP40 / DIN EN 60529 Terminal blocks: IP20 / DIN EN 60529 Material: Enclosure: ABS, V-0 material on request For details see technical information. Switch cabinet

Enclosure sizes Design example Basic profile Adjusting flap variants CN ... without adjusting flap

CombiNormClassic Dimensions Model Connection terminals for front-insertable parallel and horizontal PCBs, and connector strips for soldering onto horizontally-inserted PCBs. Hinged hoods Blind plate for covering unused terminal locations, 19 parts, can be broken off Switch cabinet Terminal identification strip, self-adhesive Load capacity of DIN rail holder

With its two rows of stepped terminals, CombiNorm Compact provides a large number of connections in minimal width enclosures. In particular, this allows the positioning of modular systems with minimal space requirement on the DIN rail. The stepped arrangement of the PCBs requires a matching PCB contour. Enclosure variants for applications with especially cost-effective rectangular PCBs are also available, one of which is designed as a universal enclosure without pre-specified terminal positions. The terminal blocks are designed specifically for use in CombiNorm Compact. In each case, 2-pole...

CombiNormCompact Colour: Light grey, similar to RAL 7035 Special colours on request Protection class: Enclosure: IP40 / DIN EN 60529 Enclosure: IP30 / DIN EN 60529 with ventilation slots Terminal blocks: IP20 / DIN EN 60529 Material: Enclosure: PA 6.6-FR (V-0) For details see technical information. Switch cabinet

Design example

CombiNormCompact Dimensions Model Marking plate for clipping onto upper and lower section of enclosure front Covers for unused terminal locations for CN..GK (L) PA 6.6-FR Terminal blocks Plug-in front panel, PA Plug-in front panel, PA Wall adapter for all CN-Compact enclosures Switch cabinet Front flap, snap-on, crystal-clear Load capacity of DIN rail holder M max. = 400 Ncm Terminal identification strip, self-adhesive

CombiNorm Connect is a modular DIN rail enclosure which makes possible external plug-in contacting of the PCB in the area of the DIN rail adapter. A selection of different spring-cage and screw terminals for wiring modules is available. Optionally, a conductive connection between the PCB and DIN rail can be created via an earthing contact. The modules are connected to each other by means of special DIN rail bus connectors. In this way, supply and signal voltages are transmitted through the complete system. Individual modules can be removed without interrupting the connection to the other...

CombiNormConnect Colour: Light grey, similar to RAL 7035 Special colours on request Material: Enclosure: polyamide UL 94 V-0 For details see technical information. Switch cabinet

Enclosure sizes Design example Three connection levels

CombiNormConnect Dimensions Model Bus connector / Pin strip Model Pin strip, 5-pole, for CNT-BV 12/2-5, to solder into the PCB 5-pole, to CNT-BV 12 5-pole, to CNT-BV 17 and 35 5-pole, to CNT-BV 22, 45, 67 and 90 CNT-BV 12/2-5 CNT-BV 17/1-5 CNT-BV 22/1-5 Switch cabinet Screw connection terminal blocks, single / double section and spring-cage terminal blocks, single section Load capacity of DIN rail holder Functional earth ground contact Filler plug

CombiNorm Control is a modular enclosure system for electronic devices with a form factor acc. to DIN 43880. The integrated top hat rail mounting permits fast, efficient mounting on a TS35 top hat rail according to DIN EN 60715. Enclosures in various module widths are available (5 HP/M, 6 HP/M, 8 HP/M, 9 HP/M, 10 HP/M, 12 HP/M). The basic body consists of few individual components which snap together completely – no need for tools. The enclosure can be adapted flexibly to the application by means of a wide range of terminals, front panels and covers.

CombiNormControl Colour: Light grey, similar to RAL 7035 Special colours on request Protection class: IP20 / DIN EN 60529; Terminal blocks IP20 / DIN EN 60529 Material: Enclosure: ABS flame retardant For details see technical information. Switch cabinet

Enclosure sizes Design example Other sizes in preparation Terminal covers Front cover

CombiNormControl Dimensions Model M = Module width (HP) P = maximum number of poles Enclosure sets Pre-defined sets are available for a fast project start. Front panels in light grey, crystal-clear or IR-permeable, red Terminal covers open on top, open in front, 5.08 grid or closed Cover plug for terminal covers Switch cabinet Terminal blocks Load capacity of DIN rail holder

#87 Quick-Finder: www.bopla.de/87 variable The enclosure body consists of anodised aluminium profiles and can be adapted to any application. Divided profile variants are available for even more design freedom or the contact-free installation of PCBs with connectors and operating elements. Combining basic profiles with module profiles which can be mounted in different ways makes it possible to create individual enclosure configurations. Plastic end profile caps create a visually standardised appearance. We also manufacture anodised sheet aluminium application-specific lids for especially creative...

Alurail Colour: Profile anodized in natural color Profile caps: Light grey, similar to RAL 7035 Special colours on request Protection class: Depending on the enclosure structure up to IP40 / DIN EN 60529 Material: Extruded profiles: Al Mg Si 0,5 anodized Profile caps: polyamide 6.6 FR For details see technical information. Switch cabinet