Catalogs >
Bopla Gehäuse Systeme GmbH >
Electronic enclosures

Electronic enclosures
21Pages

Catalog excerpts

Elesett / Eletec Element / Universal

The different variants: With and without wall brackets, and screwing from the front and behind. Pressure compensation by mounting the DAE-D11 pressure compensation membrane. For this purpose, drill (or punch) a hole in the moulded contour from the inside and glue the membrane in position. Ingress protection IP65 by means of design seal; available in various colours. This increases the mounting height for the electronics by approx. 1.7 mm. Other colours can be used depending on the project, for example translucent. A 1.6 mm thick PCB can be clamped directly between the enclosure parts and...

Open the catalog to page 2

BoLink Colour: Black, similar to RAL 9005 White, similar to RAL 9003 Special colours on request Electronics Protection class: IP40, with seal: IP65 DIN EN 60529 Material: Enclosure: PC V-0 PC V-0 material is ﬂame-resistant, self-extinguishing and suitable for outdoor use (f1 listing acc. to UL 746C). Seal: TPE For details see technical information.

Open the catalog to page 3

Enclosure size Design type

Open the catalog to page 4

BoLink Dimensions Model Pressure compensation membrane DAE 1 Drill through enclosure 2 Insert pressure compensation membrane Pressure compensation membrane D11 Design seal

Open the catalog to page 5

Circum is a design-oriented electronics enclosure system. In addition to the standard version (F / F-FP), it is also available as a console type (P / P-FP) or for wall/control panel mounting (F-NG). The enclosure screws are concealed under cover panels which are available in various colours. They can be used to create additional colour designs. Depending on the situation, versions can be selected with integrated front panels (C…F / P) or plug-in front panels (C…F-FP / P-FP). Wall mounting using the wall brackets is possible for variants F and F-FP. These can be mounted in two positions, as...

Open the catalog to page 6

Circum Colour: Graphite grey, similar to RAL 7024 Agate grey, similar to RAL 7038 Special colours on request Electronics Material: Enclosure: ABS For details see technical information.

Open the catalog to page 7

Enclosure sizes Colour variants with integrated front panel C…F-FP with plug-in front panel C 1735 F-NG Also available as a console type. 104

Open the catalog to page 8

Circum Dimensions Cover panels mit integrierter Frontplatte Cover panels Wall brackets for C…F / C...F-FP Wall frame for surface-mounting of the F-NG version Mounting frame for wall ﬁtting

Open the catalog to page 9

Separately removable front panels - plastic or aluminium, as required - ensure very easy modiﬁcation of Unimas. Concealed (“invisible”) arrangement of screws on the underside of the enclosure. Fast opening and closing – only two screws. Slot-in options for vertical PCB mounting. Depending on the design, screwless clicking into place of PCBs is possible. PCB mounting in the base and top section.

Open the catalog to page 10

Unimas Colour: Light grey, similar to RAL 7035 Special colours on request Material: Enclosure: PS (polystyrene) For details see technical information.

Open the catalog to page 11

Enclosure sizes Design type Front panels separately insertable

Open the catalog to page 12

Rubber feet Screw covers Front panel, aluminium

Open the catalog to page 13

The connector enclosures are made of ﬂame-resistant plastic, IP40 protected, and have successfully passed information test VDE 0624/IEC 884. Versions with and without earthing are available. Half-shell technology ensures easy access to the electronics. Additional variants, versions for different countries, different colours and enclosure heights are available on request. The lid can also be ﬁtted turned by 180°. This ensures optimal use of the mounting space and operating position.

Open the catalog to page 14

Elesett I Eletec Colour: Trafﬁc white, similar to RAL 9016 Special colours on request IP20 / DIN EN 60529 with protective contact socket Material: Enclosure: PC/ABS-Blend, ﬂame retardant UL 94 V-0 For details see technical information.

Open the catalog to page 15

Enclosure sizes Elesett Design types Enclosure sizes Eletec SE 420 EU

Open the catalog to page 16

Elesett I Eletec Dimensions Elesett Model

Open the catalog to page 17

The front panel is moulded onto the base – the lid can be removed without dismantling the electronics. Numerous lid variants are available and can be used to match membrane keypads and ventilation to the application. Screwing from below conceals screws in the application. The “Universal” variant consists of two identical half-shells which are easily latched together. An optional quick-release fastener – suitable for retroﬁtting – allows opening and closing of the enclosure without screwing. This is a perfect addition to the moulded contours for wall mounting.

Open the catalog to page 18

Element Universal Colour: Top: Light grey, similar to RAL 7035 Lower part: Electronics Graphite grey, similar to RAL 7024 Special colours on request Protection class: Closed: IP40 / DIN EN 60529 With ventilation slots: IP30 / DIN EN 60529 Material: Enclosure: PS (polystyrene) For details see technical information.

Open the catalog to page 19

Enclosure sizes Element E 406 Design types Element E…F Enclosure sizes Universal Design types Univer

Open the catalog to page 20

Element Universal Dimensions Element Quick-release fastener S* Enclosure with quick-release fastener A** Enclosure with front panel Additional variants Model Dimensions Universal Model Lid ﬁxing set from above Rubber feet Wall brackets (sheet steel, nickel-plated) Quick-release fastener Mounting panels in different versions

Open the catalog to page 21