Internorm Stil Interzoll Case Interzoll Plus

Colour: Graphite grey, similar to RAL 7024 Special colours on request Protection class: IP40 / DIN EN 60529 With ventilation holes (ADL) IP20 / DIN EN 60529 Material: Profiles: Al Mg Si 0,5, Diecast corners: zinc alloy Z410 Decor elements: TPE For details see technical information.

#95 Quick-Finder: www.bopla.de/95 variable Intertego is an aluminium profile enclosure whose height and width are variable. The material and function of cover plates and front panels allow the creation of almost any design. The EMC characteristics of the enclosure can be further upgraded by the use of special EMC components. Intertego can be used in many situations and is especially suitable for the installation of 19” modules. On request, the enclosure colour can be varied to meet the customers‘ specific requirements by means of the powder-coated surface. The side system groove is used to hold...

Enclosure heights Design type Decor elements Optimised for the fitting of 19” compone

Intertego Dimensions Model *C = 184,4, 244,4, 304,4 mm Individual length and width dimensions on request. Bus, rear and snap profiles for the fitting of 19” components Decor strips Tip-up feet / Unit feet Handle shell Front and part front panels and cover plates i

The desktop enclosure system consists of two plastic half shells and front panels made of different materials. Ventilation of the interior of the version fitted with air vents can be optimised by turning the half-shells against each other. Sturdy snap-lock technology makes possible fast, toolless mounting. As an option, the half-shells can be screwed together. The enclosure height (or width in vertical use) can be extended by using 45.72 mm grid extension sets (9 HP). Gradations of 15.24 mm (3 HP) can be achieved in connection with the two available basic heights. Many slots for PCBs are available...

Botego Colour: Light grey, similar to RAL 7035 Special colours on request Protection class: Closed: IP40 / DIN EN 60529 With ventilation slots: IP30 / DIN EN 60529 Material: Enclosure: ABS For details see technical information.

Enclosure sizes Design types Optional extension sets (9 HP) plain or with air vents Kappen verrasten Release caps using slotted-head screwdriver

Botego Dimensions Model Top view BO…L with ventilation View from underneath *C = the height can be increased in 9 HP steps (45.36 mm) by using the extension sets as required. Filling profile set for subrack, aluminium Design elements Angled front Cap set with collapsible tip-up foot Front and part front panels in different versions

The classic desktop enclosure system consists of two plastic half-shells and front panels in different materials. Ventilation of the interior of the version fitted with air vents can be optimised by turning the half-shells against each other. All enclosure parts are screwed together using high-quality brass thread inserts. This ensures permanently reliable opening and closing. The enclosure height can be increased with optional extension sets by 15.24 mm (3 HP) or 45.72 mm (9 HP), as required. Combining these extension sets allows gradations of 15.24 mm (3 HP) to be achieved. UM-WLH Many slots...

Ultramas Colour: Enclosure: Light grey, similar to RAL 7035 Screw covers, tabs, feet: Agate grey, similar to RAL 7038 Special colours on request Protection class: Closed: IP40 / DIN EN 60529 With ventilation slots: IP30 / DIN EN 60529 Material: Enclosure: ABS For details see technical information.

Enclosure sizes Design types Optional extension sets (3 HP, 9 HP) plain or with air vents

Ultramas Dimensions Model Tip-up foot set, collapsible Front panels in different versions Wall brackets Variant with ventilation