Console enclosures Futura / Bopult Interzoll Case

From other enclosure series. Graphite grey, similar RAL 7024 Light grey, similar RAL 7035 Special colours on request Special colours on request Seal / bumper protection Decor seals Protection class: Protection class: Seal / bumper protection: TPE

Console enclosures Alu-Topline Interzoll Case Profile anodized in natural color Individually according to your specifications Plastic lid: Graphite grey, similar RAL 7024 Black, similar RAL 9005 Special colours on request Protection class: Protection class: Project-specific higher degrees of protection on request Extruded profiles: Al Mg Si 0,5; anodized Individually manufactured; for example made of alumi- num, steel or stainless steel. Other materials and surface Seal: EPDM coatings at any time on reques

Elegant-Pult is available with a continuous membrane keypad area or with a display screen and membrane keypad area. Screwing of the enclosure takes place from below, so no unsightly screws are visible on top. The threaded bushings in the lid allow the enclosure to be opened and securely closed again many times. A moulded contour is provided on the interior for wall mounting. Removable rear front surface for easy fitting of connection and operating elements.

Elegant-Pult Colour: Top: Light grey, similar to RAL 7035 Lower part, panels, front panels: Agate grey, similar to RAL 7038 Special colours on request Protection class: IP40 / DIN EN 60529 Console Material: Enclosure: PS (polystyrene) For details see technical information.

Enclosure sizes Design types Screw covers Quick-release fastener

Elegant-Pult Dimensions Model Cover caps fork eyhole suspension Rubber feet Mounting panels

The classic console enclosure is based on the Ultramas enclosure system. As a result, many components are compatible with each other. The two plastic half-shells are made of different front panels on the back and on the control surface. Alternatively, there are also variants with closed top available. The enclosure screws are concealed under snap-on covers. All enclosure parts are screwed between each other with high-quality brass threaded inserts, which guarantees permanently reliable opening and closing.

Ultrapult Colour: Enclosure: Light grey, similar to RAL 7035 Cover caps: Agate grey, similar to RAL 7038 Special colours on request Protection class: IP40 / DIN EN 60529 Console Material: Enclosure: ABS For details see technical information.

Enclosure sizes Design types UMP Enclosure with closed console area Enclosure with open console area Wall brackets

Ultrapult Dimensions Model Front panels in different versions

Our console enclosures are available in various designs and with different equipment features. Thanks to a prepared sealing contour in the half-shells, Futura can be upgraded to IP54. In the elegant Bopult, the PCB is retained in place by the enclosure half-shells. No additional screwing necessary. Futura enclosures consist of two identical half-shells which can be used as a console enclosure or desktop enclosure when turned by 180°.

Futura I Bopult Colour: Light grey, similar to RAL 7035 Special colours on request Protection type: Enclosure dependent: IP40 / DIN EN 60529 or IP54 / DIN EN 60529 Material: Enclosure: ABS Console For details see technical information.

Enclosure sizes Futura Design types Enclosure sizes Bopult BP 810

Futura I Bopult Dimensions Futura Model Dimensions Bopult Model Console type Desktop version