Catalogs >
Bopla Gehäuse Systeme GmbH >
CombiCard 5000-7000

CombiCard 5000-7000
14Pages

Catalog excerpts

Detailed product information can be found on www.bopla.de - 3 widths - The depth can be varied by combining the components - Easy mounting of the system components - Hinge and access position freely selectable in the whole system - Various fronts - Optional rear element with separate terminal compartment (also on both sides) - Definable access protection - Installation of 19" components possible - Comprehensive range of accessories Colour: Lateral trims, front and base elements light grey, similar to RAL 7035; front lid FD…G, crystal-clear, rear elements agate grey, similar to RAL 7038; special colours on request. Protection class: IP 66/DIN EN 60529; with air vents IP 30/DIN EN 60529 Enclosure material: ABS; PC (only FD…G), seal made of CR; for details see Technical Informatio

Open the catalog to page 1

This modular enclosure system offers adaptability and protection class IP 66 All front, basic and rear elements can be combined in one basic size. The combination of “front with rear lid” can be created even without a basic element. With a suitable enclosure size, the base elements with air vents can be positioned according to the convection requirements. The integrated hinged quick-release catches allow left-hand or right-hand opening between each system component. Fitting of the enclosure does not require tools. Dismantling is possible with a slotted-head screwdriver. Each hinged catch...

Open the catalog to page 2

Front lid for accommodating membrane keypads Model Order no. A B C a1 a2 U HP FD 5000 79002800 175,7 146,7 34 128,6 131,8 3 20 FD 6000 79002900 226,5 146,7 34 179,4 182,6 3 30 FD 7000 79003000 323 146,7 34 275,9 279,1 3 49 Scope of delivery: Front lid with seal, 2 mounted locks, 1 blind plug (to close the lock opening on the opening side), 1 catch (to close the lock opening and one-time definition of the hinge side on the front lid) Note: IP protection class is only guaranteed when the front lid is closed. Front lid, crystal-clear Model Order no. A B C a1 a2 U HP FD 5000 G 79003100 175,7...

Open the catalog to page 3

Closed front frame for accommodating membrane keypads, screw-on Model Order no. A B C a1 a2 U HP FR 5000 79003700 175,7 146,7 34 128,6 113,6 3 20 FR 6000 79003800 226,5 146,7 34 179,4 164,4 3 30 FR 7000 79003900 323 146,7 34 275,9 260,9 3 49 Scope of delivery: Front frame with seal, 2 snap-on covers, 4 fixing screws Note: If required, retrofitting of a hinged quick-release fastener is possible using accessory SV 5670. A For accessories, please see the end of the chapter

Open the catalog to page 4

Open front frame with integrated seal, screw-on Model Order no. A B C a1 a2 U HP F0 5000 79003400 175,7 146,7 34 128,6 109,6 3 20 F0 6000 79003500 226,5 146,7 34 179,4 160,4 3 30 F0 7000 79003600 323 146,7 34 275,9 256,9 3 49 Scope of delivery: Front frame with seal, 2 snap-on covers, 4 fixing screws, 10 front panel fixing screws Note: On request, retrofitting with a hinged quick-release fastener is possible with accessory SV 5670. Front panels as accessories

Open the catalog to page 5

Basic element 0.5 (51.51 mm deep) Model Order no. A B BC 5000 -0,5 79001000 175,7 146,7 BC 6000 -0,5 79001100 226,5 146,7 BC 7000 -0,5 79001200 323 146,7 Scope of delivery: Base element with seal, 2 mounted locks Basic element 1 (88.25 mm deep) Model Order no. A B BC 5000 -1 79001600 175,7 146,7 BC 6000 -1 79001700 226,5 146,7 BC 7000 -1 79001800 323 146,7 Scope of delivery: Base element with seal, 2 mounted locks Basic element 1.5 (139.76 mm deep) Model Order no. A B BC 5000 -1,5 79002200 175,7 146,7 BC 6000 -1,5 79002300 226,5 146,7 BC 7000 -1,5 79002400 323 146,7 Scope of delivery: Base...

Open the catalog to page 6

Basic element for control panel mounting Model Order no. A B C a1 U HP BC 5000 NG 79001610 203,7 169,7 68,01 133,3 3 20 BC 6000 NG 79001710 254,5 169,7 68,01 184,1 3 30 BC 7000 NG 79001810 351 169,7 68,01 280,6 3 49 Scope of delivery: Base element with mounted assembly kit for control panel mounting Note: When these base elements are used, front lids must be used on both sides to close the enclosure. Tightening torque for the fixing elements = 80 Ncm Basic element for control panel mounting, with air vents Model Order no. A B C a1 U HP BC 5000 NG-L 79001910* 203,7 169,7 68,01 133,3 3 20 BC...

Open the catalog to page 8

Rear lid Model Order no. A B C a1 U HP RD 5000 79000100 175,7 146,7 50 132,7 3 20 RD 6000 79000200 226,5 146,7 50 183,5 3 30 RD 7000 79000300 323 146,7 50 280 3 49 Scope of delivery: Rear lid Note: A fixing kit BS 5670 is also required for fitting front panels FP..000 I in the rear lid. This elevates the front panel in the rear lid.

Open the catalog to page 9

Rear lid with terminal compartment Model Order no. A B C a1 U HP RD 5000 K 79000400 175,7 236,7 50 132,7 3 20 RD 6000 K 79000500 226,5 236,7 50 183,5 3 30 RD 7000 K 79000600 323 236,7 50 280 3 49 Scope of delivery: Rear lid, terminal compartment bar, terminal compartment lid including seal and fixing screws Note: A fixing kit BS 5670 is also required for fitting front panels FP..000 I in the rear lid. This elevates the front panel in the rear lid. For accessories, please see the end of the chapter

Open the catalog to page 10

Rear lid with terminal compartment on both sides Model Order no. A B C a1 U HP RD 5000 BK 79000700 175,7 326,7 50 132,7 3 20 RD 6000 BK 79000800 226,5 326,7 50 183,5 3 30 RD 7000 BK 79000900 323 326,7 50 280 3 49 Scope of delivery: Rear lid, 2 terminal compartment bars, 2 terminal compartment lids including seal and fixing screws Note: A fixing kit BS 5670 is also required for fitting front panels FP..000 I in the rear lid. This elevates the front panel in the rear lid.

Open the catalog to page 11

Wall brackets for rear lid, ABS Model Order no. Note WL 5670 79004600 For RD... WL 5670 K 79004700 For RD... K WL 5670 BK 79004800 For RD... BK Scope of delivery: 2 wall brackets including fixing material for screwing the brackets to the rear lid Internal front panels for basic elements and rear lid, 2 mm, natural-coloured anodised aluminium Model Order no. Note FP 5000 I 79004000 FP 6000 I 79004100 FP 7000 I 79004200 BS 5670 79005500 Assembly kit for FP ... I in RD Scope of delivery: 1 front panel Note: For fixing screws for mounting on BC... , see General Accessories, order no. 59006217....

Open the catalog to page 12