BoLink
8Pages

Catalog excerpts

Detailed product information can be found on www.bopla.de - 1 basic size - 3 heights - 2 colours - 3 variants (without wall brackets, with wall brackets, with wall brackets and lid fixing on top) - Design seal optional - PC material is suitable for outdoor use due to f1-listing according to UL 746C Colour: Black, similar to RAL 9005; White, similar to RAL 9003; Special colours on request Protection class: IP 40; with seal: IP 65 DIN EN 60529 Enclosure material: Enclosure: PC UL 94 V0 Seal: TPE For details see technical information

Open the catalog to page 2

fUA BOPLA A Phoenix Mecano Company The intelligent and versatile enclosure loT sensor technology With wall brackets (WL); Screws from the back With wall brackets (WL DO); Screws from the front A 1.6 mm thick PCB can be clamped directly between the enclosure parts and optionally hot melted and clenched via two pins. Ingress protection IP 65 by means of design seal; available in various colours. This increases the electronics mounting height by approx. 1.7mm. Recessed membrane area (0.6 mm) in the lid and base; interfaces can be fitted on four sides. Pressure compensation by mounting the...

Open the catalog to page 3

BOPLA enclosures ■ content matters BoLink 1 Enclosures Enclosure, IP40 (IP65) Model Order no. A B Scope Of Delivery: Lid and base, 4 screws Notes: Upgradable to IP 65 with design seal BL_DI. Colour White Black White Black White Black

Open the catalog to page 4

fii BOPLA A Phoenix Mecano Company BoLink 1 Enclosures Enclosure with wall brackets, IP40 (IP65) Model Order no. A B C cl Colour Scope Of Delivery: Lid and base, 4 screws Notes: Upgradable to IP 65 with design seal BL_DI. For accessories, please see the end of the chapter

Open the catalog to page 5

BOPLA enclosures ■ content matters BoLink 1 EnclosuresEnclosure with wall brackets and lid fixing from the top, IP40 (IP65) Model Scope Of Delivery: Lid and base, 4 screws Notes: Upgradable to IP 65 with design seal BL_DI.

Open the catalog to page 6

fii BOPLA A Phoenix Mecano Company BoLink 1 Accessories Scope Of Delivery: 5 seals Pressure compensation membrane DAE Model Scope Of Delivery: 5 pieces Notes: Air, which may create a vacuum in the enclosure when it cools, can suck in water etc. through the seal into the enclosure, which means that ingress protection can no longer be guaranteed. BOPLA's product range includes the pressure compensation element to compensate such variations in pressure caused by differences in temperature. Processing of the enclosure and mounting on request.

Open the catalog to page 7

Bopla Gehäuse Systeme GmbH I Borsigstraße 17-25 I D-32257 Bünde Phone +49 (0) 5223-969-0 I Fax +49 (0) 5223-969-100 info@bopla.de I www.bopla.de Detailed product information can be found on www.bopla.de

Open the catalog to page 8