Detailed product information can be found on www.bopla.de - 2 heights - Individually adjustable length and width - 16 standard sizes for each height ex warehouse - Aluminium baseplates and top covers - Good EMC characteristics - Wide range of accessories Colour: Aluplan 50: black, similar to RAL 9005; Aluplan 100: light grey, similar to RAL 7035; special colours on request Protection class: IP 65/DIN EN 60529 Enclosure material: Extruded profiles: Al Mg Si 0.5 powder-coated; corners: diecast zinc ZnAl 4 Cu 1, powdercoated; corner caps: PA-GF 15, corner seal TPV/TPE; sponge rubber seal (EPDM) in profile groove; for details see Technical Information

A Phoenix Mecano Company This IP 65-tight profile enclosure adapts flexibly to your The frame construction consisting of IP 65 by means of round cord seals in the Plug-in slots for tapped strips, PCBs and profiles and diecast corners permits profiles and pre-formed seals in the diecast mounting panels. assembly with varying widths and lengths. corners. On the Aluplan 100, the cover plates can be removed without disassembly of the Various feet for tipping-up the enclosure Crystal-clear or red-translucent plastic panels can be used instead of the aluminium front panel. The swivelling handle can...

For accessories, please see the end of the chapter

Handle for AP 5... Model Order no. Note AP 10 HS 64110010 For side / front profile length 100 mm AP 15 HS 64110015 For side / front profile length 150 mm AP 20 HS 64110020 For side / front profile length 200 mm AP 25 HS 64110025 For side / front profile length 250 mm Scope of delivery: Handle side parts (PA6), profile (aluminium), seals, screws Note: Processing of the profiles on request. The maximum load of the handle is 300 N. Wall brackets for AP 5... Model Order no. Note AP 50000 WL 64115000 For wall mounting parallel to the front panel AP 50000 WLS 64115010 For wall mounting on side profile...

Wall profile for AP 10... Model Order no. Note APW 20 64350020 For enclosures with front / side profile length 200 mm and higher APW 30 64350030 For enclosures with front / side profile length 300 mm and higher APW 40 64350040 For enclosures with front / side profile length 400 mm and higher APW 50 64350050 For enclosures with front / side profile length 500 mm and higher Scope of delivery: 1 wall profile (aluminium) Note: Direct suspension possible by means of the front and side profile Screw-on front panel for AP 10…, IP 65, 3 mm, natural-coloured anodised aluminium Model Order no. Note AP...

Handle for AP 10... Model Order no. Note AP 10-20 HS 64360220 For enclosures with front / side profile length 200 mm AP 10-30 HS 64360230 For enclosures with front / side profile length 300 mm AP 10-40 HS 64360240 For enclosures with front / side profile length 400 mm AP 10-50 HS 64360250 For enclosures with front / side profile length 500 mm Scope of delivery: Handle side parts (PA6), profile (aluminium), seals, screws Note: Processing of the profiles on request. The maximum load of the handle is 300 N. Unit foot for AP 10... Model Order no. AP 10 GF 64360060 Scope of delivery: 4 unit feet Note:...

Assembly kit and seal set for AP 10... Model Order no. Note AP BFS 1 64360010 Assembly kit for front panel AP 10... FAS (-IP) AP BFS 2 64360020 Slide nuts M5 suitable for T-groove on front profile for screwing on various elements AP BFS 3 64360030 Screws and dowels for fitting the enclosure or wall profile to the wall AP FAS-IP 64360040 Sealing tape for special or customer’s own front panel for subsequent upgrading to IP 65 Scope of delivery: AP BFS 1: 20 M4x10 raised countersunk head screws AP BFS 2: 20 M5 slide nuts AP BFS 3: 20 wood screws 5x50 and 20 dowels Ø 8x40 AP FAS-IP: 10 m sealing...