19 enclosures
25Pages

Internorm Stil Interzoll Modul Interzoll Plus Interzoll Case

The 19“ Internorm Stil desktop enclosure system consists of powder-coated aluminium components and is compatible with the accessory components and profiles in the Interzoll Modul product range. We recommend the ventilated enclosure if electronic components generate high temperatures. In this way, the airflow is conducted from “below at the front” to “top at the rear”. The standard enclosure design provides good EMC characteristics, which can be upgraded by the use of optional EMC components. Thanks to the various equipment options such as handles and tip-up feet, Internorm Stil can be flexibly...

Internorm Stil Colour: Enclosure: White aluminum, similar to RAL 9006 Profiles, feet: Anthracite grey, similar to RAL 7016 Material: Profiles: Al Mg Si 0,5, anodized Covers: diecast aluminum Front handles / flanges: diecast aluminum Side walls, cover and side panels: passivated alumiunium For details see technical information.

B + C = Profile lengths individually selectable All enclosure sizes are available with and without ventilation. With ventilation

Internorm Stil Dimensions Model INS 24340 (-L) INS 24360 (-L) INS 24380 (-L) INS 30340 (-L) INS 30360 (-L) INS 30380 (-L) INS 36360 (-L) INS 36380 (-L) INS 42380 (-L) INS 48380 (-L) Without / with ventilation Without / with ventilation Tower enclosure Without ventilation Strap handles incl. lateral trim Flange with handle, screwable in place of the cover strips Plug-in stack adapter EMC springs for horizontal shielding between cover plates and side panels Front and part front panels in different versions

By using an Internorm enclosure, a 19” subrack can be converted into a sturdy desktop device. The enclosure half-shells – made of impact-resistant plastic – are screwed together using variable-length aluminium profiles. The enclosure screws are under hinged covers opened by means of a pushbutton. This principle is used for the tip-up feet on the underside of the enclosure. The height of both half-shells (basic height: 3 U) can be extended in 1 U steps with extension sets. The enclosure can be upgraded to protection class IP54 by the use of seals and IP front panels or lockable doors....

Internorm Colour: Enclosure: Light grey, similar to RAL 7035 Corner profiles, cover caps, Door: Silver grey, similar to RAL 7001 Protection class: IP40 / DIN EN 60529 IP54 / DIN EN 60529 optional Material: Enclosure: PS (polystyrene) Seal: CR / TPE (Round cord / FIP seal) For details see technical information.

Enclosure sizes Design types FPS ... Front / back panels screwable IN 35060 IN 45080 PZ ... 19“ profile sets for fitting of subracks or screw-on front panels.

Internorm Dimensions Model Press to open! Wall corner profile sets Seal IP 54 / EMC seal for enclosures and extension sets Snap-in outlet filter Handles / tip-up bows, hinged Front and part front panels in different versions PEK … corner profile sets for pushing or latching onto the enclosure corners. Optionally also available with moulded-on wall bracket. AB ... One extension set raises the enclosure by one HP. Extensions sets with air vents on request.

The 19” Interzoll Plus desktop enclosure system is compatible with the accessory components from the Interzoll product range. Interzoll Plus has sheet steel covers on top and underneath. Different colours can be achieved by using powder lacquering. Optional tip-up feet or handles allow use as a desktop enclosure. The side parts consist of an anodised aluminium profile onto which the plastic covers for the enclosure screws can be snapped. Interzoll Plus has integrated tip-up feet on the back, so in mobile use it can be securely positioned upright and rear exits are protected mechanically.

Interzoll Plus Colour: Enclosure: Light grey, similar to RAL 7035 Or natural color anodized, special colours on request Protection class: IP40 / DIN EN 60529 IP20 / DIN EN 60529 with ventilation (ADG…-L) Material: Profiles: Al Mg Si 0,5, anodized Cover plates: sheet steel Plastic panels, covers: ABS / PVC V-1 For details see technical information.

Enclosure sizes Design types

Interzoll Plus Dimensions Tapped strips GS II Card guide, one and three parts Subrack flange, aluminium, silver-coloured anodised Clamp profile sets for fitting of split cover plates Front and part front panels and cover plates in different versio

The subracks in the Interzoll Modul series have the option of continuous EMC screening. All enclosure components can be connected conductively by means of specially-matched EMC accessories. Interzoll Modul provides a matching card guide for every situation – and with mechanical coding on request. To unlock, apply side pressure. Versions for backplane technology (.Pi) for direct screw-on connectors (.12) acc. to DIN EN 60603-2, and for plug-in units acc. to IEC 60297-3-101. Subracks and accessories with the BN designation are certified for use in buses and rail vehicles. The support brackets...

Interzoll Modul Colour: Anodized in natural color Production class: IP40 / DIN EN 60529 IP20 / DIN EN 60529 with ventilation (ADG…-L) Material: Profiles: Al Mg Si 0,5, anodized For details see technical information.

Enclosure sizes Design types C EMC springs For the connection between the front panel / backplane and profile

Interzoll Modul Dimensions Model 6U Accessories EMC springs For the connection between profile and cover plate Shielded rear hood Card guide Handles / Flanges Various profiles e.g. front profiles, (double) bus profiles, rear profiles, double connector profiles, snap profiles, end profiles Front and part front panels in differen

The subracks in the Interzoll ranges are especially suitable for basic applications in which no measures are required for EMC screening. For EMC requirements we recommend the Interzoll Modul range. Selected variants are equipped with aluminium profile single-piece side panels fitted with an integrated mounting flange. This guarantees a high level of mechanical stability coupled with excellent cost effectiveness. Double profiles ensure fast, efficient mounting. Subracks and accessories with BN designations are certified for use in buses and rail vehicles. Locking of the card guides is by means of...