DatasheetArdbox AnalogHF+ MODBUS &LoRa

Product catalog summary

Overview: The Ardbox Analog HF+ MODBUS & LoRa is a programmable logic controller (PLC) designed for industrial automation applications. It supports multiple communication protocols including MODBUS, LoRa, I2C, USB, RS485, RS232, and SPI.

Specifications:

Model Type: Ardbox Analog
Maximum Current: 1.5A
External Power Supply: 24Vdc
SRAM: 2.5KB
Analog/Digital Inputs: 10-bit (0-10Vcc) - 7 channels
Analog Outputs: 8-bit (0-10Vcc) - 6 channels
Digital Inputs: 24Vcc - 1 channel
Digital Isolated Outputs: 24Vcc - 3 channels
PWM Isolated Outputs: 8-bit (24Vcc) - 6 channels
Operating Voltage Range: 11.4 to 25.4Vdc
Clock Speed: 16MHz
Flash Memory: 32KB (4KB used by bootloader)
Dielectric Strength: 2,300 VAC at 50/60 Hz
Ambient Temperature (Operating): 0º to 60ºC
Ambient Humidity (Operating): 10% to 90% (no condensation)
Weight: 350g max

Installation and Maintenance:

Ensure power supply between 12Vdc and 24Vdc to avoid damage.
Install in a housing, cabinet, or electric control room with a minimum distance of 25 cm from other components.
Maintenance should be performed by qualified personnel with the equipment disconnected from power sources.
Do not disconnect equipment in flammable or combustible atmospheres.

Programming and Control:

Compatible with Arduino IDE version 1.8.0 or higher.
Programming Language: Based on Wiring, similar to C.
Control Method: Combination of cyclic scan and immediate refresh processing methods.

Warnings and Safety:

Follow installation requirements to prevent personal injury or property damage.
CE marking indicates compliance with EU regulations.
Symbols indicate suitability for direct or alternating current and identify control and hazard points.

Technical Support: For assistance, contact Industrial Shields via their website, chat service, or support email.

Catalog excerpts

Datasheet Ardbox Analog HF+ MODBUS & LoRa

Open the catalog to page 1

015001001200 Technical Features CONECTABLE PLC ARDUINO 24Vcc ARDBOX MODEL TYPE Ardbox Analog Input Voltage 12 to 24Vdc (Fuse protection (2.5A) Polarity protection) Input rated voltage Rated Power Clock Speed Flash Memory 32KB of which 4KB used by bootloader Communications & Accessories 0 to 10Vac Input Impedance: 39K Separated PCB ground Rated Voltage: 10Vac 7 to 24Vdc I min: 2 to 12 mA Galvanic Isolation Rated Voltage: 24 Vdc 7 to 24Vdc I min: 2 to 12 mA Galvanic Isolation Rated Voltage: 24 Vdc I2C : 127 elements - ModbusRTU RS485: 32 elements - LoRa * The Analog outputs can also work as Digital...

Open the catalog to page 2

DatasheetArdbox AnalogHF+ MODBUS &LoRa-4

015001001200 Performance Specifications Arduino Board Arduino Leonardo Control method Stored program method Combination of the cyclic scan and immediate refresh processing methods. Programming language Arduino IDE. Based on wiring (Wiring is an Open Source electronics platform composed of a programming language. “similar to the C”) The steps to follow to install our equipment’s to Arduino IDE are: • Open the Arduino IDE, versión 1.8.0 or superior. If you don’t have it yet , you can download here https://www.arduino.cc/en/Main/Software . • Press the “Preferences”option to “File” menu and open...

Open the catalog to page 4

DatasheetArdbox AnalogHF+ MODBUS &LoRa

DatasheetArdbox AnalogHF+ MODBUS &LoRa

Catalog excerpts

All Boot and Work Corp, S.L. catalogs and technical brochures