PS-T Series 1-inch Optical Post-&-Peg System
2Pages

MIRROR MOUNTS Pedestal Post System PS Pedestal Posts PS-SC Sliding Clamp • Highly stable — long-term alignment maintained LENS MOUNTS • Clamping fork secures a pedestal post anywhere on an optical table • Create nearly any height with extension posts and spacers RAIL SYSTEMS SPECIALTY OPTICAL MOUNTS • Index marks for quick height reference PS-E Extension Posts • Wide selection of accessories The Pedestal Post System enables ultra-stable mounting of optical components. Made from precision ground stainless steel, these 1 in. (25.4 mm) diameter posts maintain longterm optical system alignment. Slotted clamping forks secure pedestals anywhere on an optical table. The PS-B-0.5 and PS-B-1 Pedestal Bases have a 1/4-20 (M6) thru-hole and can be used for turning TPS Series Posts into pedestals. SS-1-B converts a 1/4-20 (M6) hole into an 8-32 (M4) for mounting components close to the table surface. BASES, BRACKETS AND CLAMPS MECHANICAL OPTICS Spacers and Table Adaptor The PS-SC Sliding Clamp secures an optical mount at any position and angle along the length of the post. PS-45 Series pedestal adaptors allow Suprema SN100/SS100 series and Ultima U100-A series mirror mounts to be pedestal mounted at a fixed 45 degrees. An extension of the Pedestal Post system, the PS-Q Pedestal Cube is designed to allow mounting of PS Series Pedestal and Extension Posts at a 90-degree angle enabling the construction of ultra-stable multi-dimensional structures. What makes the Pedestal Cube system unique is its ability to allow alignable stacking of cubes on to posts. This is accomplished by using the PS-Q-A thread adaptor which fits into either of the two counterbores on the cube. The thread adaptor allows the cube to be rotated to the same orientation as any of the cubes below it while also providing a threaded hole on top of the cube for further stacking of posts or other cubes. With this feature, unlike other cubes, the Pedestal Cube can be infinitely stacked while maintaining a common alignment. PS-1Z (M-PS-1Z) Magnetic Pedestal Posts COMPONENT SETS OPTICAL POSTS AND RODS Pedestal Bases have a 1/4-20 (M6) clearance hole for mounting classic Post Holders and TPS Series Posts. FILTER MOUNTS PS-45 Series Pedestal Adaptors

Model (Metric) Pedestal Posts Extension Posts Pedestal Post Spacers A beam steerer can be built by attaching an extension post to a pedestal post and adding sliding clamps with mirror mounts. Pedestal Post Accessories Pedestal Base Adaptor Pedestal Base Adaptor Table Adaptors Magnetic Pedestal Post Thread Adaptor PS-SC (M-PS-SC) Sliding Clamp Clamping Fork Pedestal Cubes PS-Q and M-PS-Q shown with the Pedestal Cube Thread Adaptor, 8-32. MECHANICAL OPTICS RAIL SYSTEMS SPECIALTY OPTICAL MOUNTS LENS MOUNTS MIRROR MOUNTS Ordering Information *For 1-in. mirror diameter Suprema mounts only...