PROTECTING SLEEVE Notes: The information contained in this catalog is indicative only. Bonsing reserves the rights at all times to incorporate modifications in the models described, in accordance with technical or commercial requirements. Technical Data Sheet No.: Q/TJZD 2019-002 Version: A/0 Effective: 2019-02-28 SPANDOFLEX® SC Technical Overview: -Max Working Temperature: -70oC, +150oC -Size Range: 6mm-50mm -Applications: Wire harnesses Pipe and hoses Sensor assemblies -Colors: Black (BK Standard) Orange (OR Standard) Other colors available upon request Spandoflex® SC is a self closing protective sleeve made with a combination of polyeth-ylene terephthalate (PET) monofilaments and multifilaments. The self-closing concept allows the sleeve to be installed easily onto pre-terminated wires or tubes, thus allowing installation at the end of the whole assembly process. The sleeve offers also very easy maintenance or inspection by just opening the wraparound. Spandoflex® SC is a tough sleeve resistant to cut, designed to protect wire bundles and harnesses, hoses, tubing, and cable assemblies from mechanical damage and environmental hazards. It slips quickly and self-fits on irregular shapes and countours. Material: Polyethylene Terephthalate (PET) Construction: Woven Applications: Rubber hoses Plastic pipes Wire harnesses Dimensions: Size ID Nominal Max ID Bonsing Corporation Limited 1 Futong Dongdajie, Chaoyang District, 012300 Beijing, China Tel.: 0086 010 88999278, Fax: 0086 010 85999276, Email: [email protected]