PROTECTING SLEEVE Notes: The information contained in this catalog is indicative only. Bonsing reserves the rights at all times to incorporate modifications in the models described, in accordance with technical or commercial requirements. Technical Data Sheet No.: Q/XHGJ 2019-007 Version: A/0 Effective: 2019-02-28 SPANDOFLEX® HA/HAT Technical Overview: -Max Working Temperature: -70°C,+150°C -Size Range: 3mm-50mm -Applications: Wire harnesses Pipe and hoses Sensor assemblies -Colors: Black (BK Standard) Other colors available upon request Spandoflex® HA is a protective sleeve made of polyethylene terephthalate (PET) multifilament braided in a tight construction. It is extremely tough and resistant to abrasion and cut, thus extending considerably the life time of the protected tube or pipe. Spandoflex® HAT offers even more protection versus the standard Spandoflex® HA. The braiding construction and material used in this case offers a superior abrasion grade which offers, in some critical parts, the highest possible protection. The sleeve is manufactured in a way that through the hot cut no issues are risen for the installation. Material: Polyethylene terephthalate (PET) Construction: Braided Applications: Rubber hoses Plastic pipes Wire harnesses Dimensions: Size ID Nominal Max ID Bonsing Corporation Limited 1 Futong Dongdajie, Chaoyang District, 012300 Beijing, China Tel.: 0086 010 88999278, Fax: 0086 010 85999276, Email: [email protected]