Specifications The Model Series DBXE is a flameproof S-Beam
Load Cell with capacities ranging from 1 to 3 tons. It is designed to meet the Ex d IIB T4 / KOSHA standards. Key specifications include:
- Non-linearity, hysteresis, and non-repeatability are all ≤0.05% R.O.
- Creep error is ≤0.03% in 20 minutes.
- Zero balance is ≤1% R.O.
- Compensated temperature range is -10 to 70°C, while the operating temperature range is -20 to 80°C.
- Temperature effect on rated output and zero balance is ≤0.03% per 10°C.
- Insulation resistance is a minimum of 2000 MOhms at 50V DC.
- Recommended excitation voltage is 3~12V, with a maximum of 15V.
- Safe overload is 150% R.C., and ultimate overload is 300% R.C.
- Terminal output resistance is 350 Ohms ± 10 Ohms, and terminal input resistance is 400 Ohms ± 10 Ohms.
- Rated output is 1.5mV/V ± 0.005mV/V.
Wiring Information The wiring configuration is as follows:
- Red: EXC. (+)
- White: SIG. (+)
- Green: EXC. (-)
- Blue: SIG. (-)
- Bare: GND.
Protection and Approval
The load cell is IP68 rated and KOSHA approved for Ex d IIB T4 environments.
Mounting Kit and Dimensions
The mounting kit includes rod end ball joints with dimensions varying based on the capacity (1t, 2t, 3t). The construction is made from 17-4PH stainless steel, ensuring high accuracy.
Contact Information Bongshin Loadcell Co., Ltd. is located at 55, Seobuk-ro, Gajang Ind. Complex, Osan-si, Korea. For inquiries, contact via phone at 82-31-742-6661 or email at
[email protected].
See more