Overview
The document provides technical specifications for the DBHS Series S-Beam Load Cell, designed for industrial scale conversion and various process applications. The load cell is constructed from stainless steel and is fully sealed to meet IP67 protection standards.

Model and Capacity
The DBHS Series includes models with capacities of 50kg, 100kg, 200kg, 500kg, and 1 ton. The rated capacities are expressed in both kilograms and Newtons.

Specifications

• Rated Output: 2.0mV/V ± 0.5%
• Non-linearity: ≤0.03% R.O.
• Hysteresis: ≤0.03% R.O.
• Non-repeatability: ≤0.02% R.O.
• Creep Error: ≤0.03% in 20 minutes
• Zero Balance: ≤1% R.O.
• Compensated Temperature Range: -10 to 70°C
• Operating Temperature Range: -20 to 80°C
• Temperature Effect on Rated Output: ≤0.03% LOAD/10°C
• Temperature Effect on Zero Balance: ≤0.03% R.O./10°C
• Terminal Input Resistance: 350 Ohms ±3.5 Ohms
• Insulation Resistance: Minimum 2000 MOhms at 50V DC
• Excitation Voltage: 3~12V (Recommended), 15V (Max.)
• Safe Overload: 150% R.C.
• Ultimate Overload: 300% R.C.

Dimensions and Weight
Dimensions vary based on the model's capacity, with specific measurements provided for each capacity range. The weight of the load cells ranges from 0.40kg to 0.73kg.

Wiring Information

• RED: EXC. (+)
• WHITE: EXC. (-)
• GREEN: SIG. (+)
• BLUE: SIG. (-)
• BARE: GND.

Contact Information
Bongshin Loadcell Co., Ltd. is located in Osan-si, Korea. Contact details include a telephone number, fax, and email address for further inquiries.