Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW
270Pages

{{requestButtons}}

Catalog excerpts

Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW - 1

ACTIVE CUBE Operating Instructions Frequency inverter 230 V / 400 V / 525 V /690 V 0.25 kW ... 400 kW

Open the catalog to page 1
Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW - 11

1 General Information about the Documentation 1.1 For better clarity, the documentation is structured according to the customer-specific requirements made on the frequency inverter. Quick Start Guide The “Quick Start Guide” describes the basic steps required for mechanical and electrical installation of the frequency inverter. The guided commissioning supports you in the selection of necessary parameters and the configuration of the frequency inverter by the software. Operating Instructions The Operating Instructions document the complete functionality of the frequency inverter. The...

Open the catalog to page 11
Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW - 12

The following instructions are available for the ACTIVECUBE series: QThe products for CANopen® communication comply with the specifications of the user organization CiA® (CAN in Automation). Ii The products for EtherCAT® communication comply with the specifications of the user organization ETG (EtherCAT Technology Group). The present documentation was prepared with great care and it was subjected to extensive and repeated reviews. For reasons of clarity, it was not possible to include all details of all types of the product in the documentation. Neither was it possible to consider all...

Open the catalog to page 12
Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW - 13

This document This documentation describes the frequency inverters of the ACTIVE Cube series. The modular hardware and software structure enables customer-specific adaptation of the frequency inverters. Applications with high functionality and dynamism requirements can be realized easily. The Operating Instructions contain important information on the installation and the use of the product in its specified application range. Compliance with this user manual contributes to avoiding risks, minimizing repair cost and downtimes and increasing the reliability and service live of the frequency...

Open the catalog to page 13
Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW - 14

The ACTIVE Cube series can be recognized by its label on the case and the identification below the top cover. (Position of ID depends on size) BONFIGLIOLI VECTRON GmbH (hereinafter referred to as “manufacturer”) notes that the contents of this Operating Instructions document do not form part of any previous or existing agreement, assurance or legal relationship between the manufacturer and the user of these Operating Instructions (hereinafter referred to as the “User”). Neither are they intended to supplement or replace such agreements, assurances or legal relationships. Any obligations of...

Open the catalog to page 14
Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW - 15

Bonfiglioli Vectron MDS GmbH Europark Fichtenhain B6 47807 Krefeld GERMANY These Operating Instructions are intended for the operator of the frequency inverter. Any disclosure or copying of this document, exploitation and communication of its contents (as hardcopy or electronically) shall be forbidden, unless permitted expressly. Any non-compliance will constitute an offense against the copyright law dated 09 September 1965, the law against unfair competition and the Civil Code and may result in claims for damages. All rights relating to patent, utility model or design registration...

Open the catalog to page 15
Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW - 16

2 General safety instructions and information on use This chapter contains general safety instructions for the Operator and the Operating Staff. At the beginning of certain main chapters, some safety instructions are included which apply to all work described in the relevant chapter. Special work-specific safety instructions are provided before each safety-relevant work step. According to the documentation, different activities must be performed by certain persons with certain qualifications. The groups of persons with the required qualification are defined as follows: Operator This is the...

Open the catalog to page 16
Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW - 17

Any use other than that described in "Designated use" shall not be permissible and shall be considered as misuse. For, example, the machine/plant must not be operated      by uninstructed staff, while it is not in perfect condition, without protection enclosure (e.g. covers), without safety equipment or with safety equipment deactivated, when general requirements, such as operating conditions and technical data, are not met. The manufacturer shall not be held liable for any damage resulting from such misuse. The sole risk shall be borne by the operator. Explosion protection The...

Open the catalog to page 17
Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW - 18

Identification of immediate threat holding a high risk of death or serious injury if not avoided. WARNING Identification of immediate threat holding a medium risk of death or serious injury if not avoided. CAUTION Identification of immediate threat holding a low risk of minor or moderate physical injury if not avoided. Identification of a threat holding a risk of material damage if not avoided.

Open the catalog to page 18
Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW - 19

2.7 Directives and guidelines to be adhered to by the operator The operator must follow the following directives and regulations: • Ensure that the applicable workplace-related accident prevention regulations as well as other applicable national regulation are accessible to the staff. • An authorized person must ensure, before using the frequency inverter, that the device is used in compliance with its designated use and that all safety requirements are met. • Additionally, comply with the applicable laws, regulations and directives of the country in which the frequency inverter is used. •...

Open the catalog to page 19
Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW - 20

General work safety In addition to the Operating Instructions of the machine/plant, any applicable legal or other regulations relating to accident prevention and environmental protection must be complied with. The staff must be instructed accordingly. Such regulations and/or requirements may include, for example, handling of hazardous media and materials or provision/use of personal protective equipment. In addition to this Operating Instructions, issue any additional directives that may be required to meet specific operating requirements, including supervision and reporting requirements,...

Open the catalog to page 20
Active Cube Operating Instructions Frequency Inverter 230 V / 400 V / 525 V / 690 V 0,25 kW ... 400 kW - 21

<§) Bonfiglioli Vectron • Never touch live terminals. In sizes 1 through 7, the DC-link may have dangerous voltage levels up to 3 minutes after shutdown. In size 8, the DC-link may have dangerous voltage levels up to 10 minutes after shutdown. • When performing any work on/with the frequency inverter, always comply with the applicable national and international regulations/laws on work on electrical equipment/plants of the country in which the frequency inverter is used. • The cables connected to the frequency inverters may not be subjected to high-voltage insulation tests unless...

Open the catalog to page 21

All Bonfiglioli catalogs and technical brochures

  1. HDP

    88 Pages

  2. Wind Solutions

    24 Pages

  3. 610X Series

    2 Pages

  4. 600Y3 Series

    2 Pages

  5. 600W series

    2 Pages