cad

Special cylinders obtained from standard models
7Pages

{{requestButtons}}

Catalog excerpts

Special cylinders obtained from standard models - 1

Special pneumatic cylinders/actuators. Examples of projects realized. Special cylinders obtained from standard models ISO6432 cylinder Ø 25 mm. with system of stroke adjustment by threaded nuts and privat label with the Logo of the Customer. ISO6432 cylinder Ø 20 mm. with double stroke and front nose with extended thread, supplied complete with quick fittings. Round cylinder with screwed caps “interchangeable” with the old CP model of Bonesi Ettore, Ø 27 mm., stroke 80 mm., double acting, mounting by front flange. Round cylinder with screwed caps “interchangeable” with the old model of Pneumatica Italiana, Ø 40 mm., stroke 40 mm., single acting front spring, mounting by front thre

Open the catalog to page 1
Special cylinders obtained from standard models - 2

Special pneumatic cylinders/actuators. Examples of projects realized. Special cylinders obtained from standard models Compact cylinder originated from CU series: - dimensions according UNITOP standards - Ø 63 mm., stroke 25 mm., double acting Special tandem version with three thrust stages, double ended piston rod in stainless steel AISI 303, increased to 20 mm. piston rod diameter, reinforced guide bushings. Compact cylinder, Ø 50 mm, stroke 15 mm, double acting, double ended and hollow special piston rod, extended in one side with a calibrated hole Ø 8 mm, caps and tube in anodized...

Open the catalog to page 2
Special cylinders obtained from standard models - 3

Special pneumatic cylinders/actuators. Examples of projects realized. Special cylinders obtained from standard models Tie-rod compact cylinder, Ø 250mm, stroke 75 mm, without adjustable cushions, with steel tube internally hard chromium plated and externally epoxy painted, caps in die cast aluminium epoxy painted, piston rod and tie-rods in stainless steel AISI 304. Cylinders series ISO15552 Ø 160 and 200 mm., tandem version with double thrust, tie-rod construction, with caps and tube in aluminium protected by epoxy painting, piston rod and tie-rods in stainless steel AISI 304. Double...

Open the catalog to page 3
Special cylinders obtained from standard models - 4

Special pneumatic cylinders/actuators. Examples of projects realized. Special cylinders obtained from standard models Tie-rod CNOMO cylinder, Ø 200 mm., stroke 400 mm., tube in steel internally chromium plated and epoxy painting, caps in aluminium painted, special execution with piston seal for fast sliding, guide runner in carbo-graphite, used to balance masses in fast movement. Cylinders ISO 15552 Ø 80, 100 and 125 mm., with special internal device for the anti-rotation of the piston rod. Cilinders ISO15552 Ø 32,40,50,63,80,100 mm., available for several strokes, with integrated...

Open the catalog to page 4
Special cylinders obtained from standard models - 5

Special pneumatic cylinders/actuators. Examples of projects realized. Special cylinders obtained from standard models Tie-rod cylinder, Ø 63 mm., stroke 150 mm., tube in steel internally hard chromium plated and epoxy painting, special execution with piston seal for very high speed sliding, guide runner in carbo-graphite and special grease for high performances, for functioning in ”positioning” linear actuators. Tie-rod cylinder series ISO15552, working with compressed air up to 16 bars and high vacuum, single acting, without air the piston rod is out with springs integrated in the rear...

Open the catalog to page 5
Special cylinders obtained from standard models - 6

Special pneumatic cylinders/actuators. Examples of projects realized. fSanesi \—yPneumatik Special cylinders obtained from standard models Cylinder with dimensions according CNOMO standards, special execution with double ended and hollow piston rod. - 0 63 mm., stroke 35 mm., double acting, caps in aluminium with epoxy painting with reinforced guide with bush in bronze, profiled tube in anodized aluminium, piston rod diameter 25 mm., with hole 0 18 mm., magnetic piston and seals in nitril rubber (NBR). Cylinder with dimensions according CNOMO standards, special execution with double ended...

Open the catalog to page 6
Special cylinders obtained from standard models - 7

Special pneumatic cylinders/actuators. Examples of projects realized. Special cylinders obtained from standard models Compact cylinder, tandem in thrust, caps in melting of aluminium, front cap in steel with integrated rotation pins, rear and intermediated caps in anodized aluminium, profiled tube in anodized aluminium, increased piston rod diameter 32 mm., adjustable cushion only on return stroke. Tie-rod cylinder ISO15552, Ø 250 mm., stroke 400 mm., tube in anodized aluminium, caps in melting of aluminium, special execution with piston seal of fast sliding, guide band in carbographite and...

Open the catalog to page 7

All Bonesi Pneumatik s.r.l. catalogs and technical brochures

  1. Kratospack

    32 Pages

  2. FOOT PEDAL

    2 Pages

  3. CC Series

    20 Pages

  4. UI Series

    32 Pages

  5. Frl Groups

    16 Pages