Nebulizer by depression for fluids NBZ-5 Ports: Tube Ø4 - Tube Ø6 NBZ-5 Nebulizer with Venturi effect Adjustable spout by means of a knurled ring nut Not effected by impurities on pneumatic fluid 57 Dimensions extremally reduced Liquid Body in aluminum alloy fumè anodized Adjustable ring nut in nickel plated brass Available version for high temperature Especially suitable for use with aggressive liquids, coolings, lubricants, stickings and detachment liquids. TECHNICAL FEATURES Function Nebulizer for fluids with Venturi effect with adjustable spout by means of a knurled ring nut Pneumatic: the aspiration of the liquid happens at flowing of the air throughout the valve Standard: body in aluminium alloy fumè anodized, adjustable ring nut in nickel plated brass, internal components in brass, seals NBR/FKM. Note about materials Working temperature Standard: High temperature (FKM): Working pressure 0°C ÷ +60°C (-10°C with dry air, in order to avoid formation of ice) 0°C ÷ +150°C Flow capacity Flow rate Inlet pressure 3,5 Nl/min 4,0 Nl/min 4,5 Nl/min Pneumatic fluid Filtered air, with or without lubrication, according to ISO 8573-1:2010 [7:4:4] Quantity of liquid aspirated See diagram according to pressure DIAGRAMS OF CAPACITY AND OF THE ASPIRATED LIQUID FLOW RATE DIAGRAM DIAGRAM OF THE ASPIRATED LIQUID With spout completely open and without any liquid aspireted With spout completely open and oil ISO 22 aspireted Inlet (bar) 7 Flow rate 6,5 (nl/min) ORDERING CODE (Example of code) SERIES NBZ-5 = Nebulizer by depression for fluids with Venturi effect with adjustable spoud PORT NULL = Tube Ø4 / 6 = Tube Ø6 SEALS NULL = Seals in NBR -10°C ÷ +60°C FKM = Seals in FKM for high temperature -10°C ÷ +150°C BONESI PNEUMATIK produces all its products in Italy Via A. Robino n. 117 20025 Legnano (MI) Italy P.I. / C.F. 10396340159 R.E.A. 1373315 www.bonesipneumatik.it [email protected] Phone +39 0331 448000 Tel