Overview
The CZ series hydraulic cylinder is a dynamically passive device designed for steady movement of a mass pushed by a pneumatic cylinder. It can be installed in parallel, in line, or opposed to the moving body.

Range
The cylinder is available with a bore size of 35 mm and stroke lengths ranging from 50 mm to 500 mm.

Technical Data

• Braking power: Maximum 800 daN, Minimum 30 daN
• Temperature range: -20°C to +70°C
• Speed regulation range: 40 mm/minute to 12 m/minute

Standard Features

• Single and double adjustment for thrusting and pulling
• SKIP valve and STOP valve with pneumatic control

Construction Features

• Body: Externally cadmium plated drawn brass
• End cap: Anodized drawn aluminium
• Piston rod: Vanadium chrome plated steel
• Tie rods: Cadmium plated steel
• Seals: NBR anti-oil nitrile rubber and polyurethane
• Hydraulic circuit oil: ATF FLUID
• Standard fixing with threaded nose; front end cap projecting tie rods available upon request

Dimensions
The dimensions vary based on stroke length, with specific measurements provided for strokes ranging from 0-75 mm to 451-600 mm.