Special pneumatic cylinders/actuators. Examples of projects realized. Cylinders totally special, according Customer design Compact cylinder Ø 80 mm. stroke 15 mm., double acting, piston rod Ø 50 mm. with internal through hole Ø 35 mm., magnetic piston. Round cylinder with screwed caps, Ø 220 mm. stroke 100 mm., caps in chemical nickel plated aluminium, rear cap with integrated hinge, tube in nickel plated brass with epoxy painting, piston rod in stainless steel AISI 304. Cylinder Ø 100 mm. stroke 60 mm., single acting, exit of the piston rod by low pressure steam and return by force of gravity, piston rod, piston and tube in stainless steel AISI304, caps in aluminium, piston seal in energized PTFE with segment guide in carbo-graphit

Special pneumatic cylinders/actuators. Examples of projects realized. Cylinders totally special, according Customer design Cylinder with dimensions according to ISO15552 standards, Ø 80 mm. stroke 200 mm., with integrated system of adjustment of end of stroke and device to read position. Special compact cylinder for thermo sealing machines, food packaging field, piston Ø 180mm. stroke 25 mm., double acting, front and rear caps in anticorodal aluminium chemical nickel plated, piston and piston rod in stainless steel AISI 304, tube in stainless steel AISI 304, FKM (Viton) seals for high temperature....

Special pneumatic cylinders/actuators. Examples of projects realized. Cylinders totally special, according Customer design Tandem compact cylinder, double thrust, 0 100 mm. stroke 25 mm., double acting, magnetic piston, mechanical adjustment of the return stroke and with integrated control solenoid valve. Tie-rod cylinder, double acting, 0 200 mm. stroke 210 mm., caps in C45 nickel plated steel, tube in steel internally smoothed and chromium plated, externally protected by epoxy painting, piston rod diameter 32 mm. in C45 chromium plated steel, piston rod and piston seals in NBR (nitrilic rubber).....