*mydirectindustry

Grips - HPCI

Product catalog summary

Introduction
HP Hydraulic offers a wide range of hand grips for mobile working vehicles like construction and agricultural machinery. The document outlines standard configurations and characteristics for selecting the appropriate grip, with special configurations available upon request.

Grip Types and Specifications
The document describes anatomical, cylindrical, and ergonomic grips, available in straight or tilted (15° left or right) configurations with M10 or M12 mounting options. Detailed dimensions and measurements are provided for each type.

Electric Controls
Grips include electric controls such as push buttons and toggle switches, with configurations for top and front placements. They have micro capacity ratings of DC 12V x 2A and DC 28V x 5A resistive. Some grips feature integrated electronic control units for proportional outputs (PWM signals).

Ordering Instructions
Instructions cover series, models, pivots, and special versions, with specific pages referenced for detailed information. Options for connectors and electric control configurations are outlined for top and front placements.

Multifunction Grips
These grips come with electronic proportional controls and integrated PCBs for power output, capable of controlling multiple axes when combined with external electronic units. Examples include grips with proportional roller switches for PWM signal output.

Programming and Customization
Customization of integrated electronic cards is available for specific applications, focusing on ramp programming for optimal machine operation. A specific variant number from HP Hydraulic is required for tailored programming.

Specifications
The document details specifications for integrated PCBs in hand grips, focusing on PWM output current programming. Parameters such as voltage, current, and PWM frequency are tailored to specific applications. Maximum total current is 6.5 A at 12 VDC and 4.5 A at 24 VDC, with a maximum current per channel of 3 A at 12 VDC and 2 A at 24 VDC. Standard PWM frequency ranges from 100 to 400 Hz, typically set at 200 Hz.

Procedures
Programming the PCB requires a 3-figure code from HP Hydraulic SpA after agreeing on application and ramp settings. Programming involves setting the current delivered as a percentage of the maximum, based on the roller switch's position.

Standards and Protection
Hand grips with electronic buttons and roller potentiometers have an IP67 protection rating, ensuring resistance to dust and water. Supply voltage for nominal 12 VDC batteries is 9-16 VDC effective, and for 24 VDC batteries, it is 18-30 VDC effective.

Recommendations
Soft current ramps are recommended for both increasing and decreasing current, with different output curves depending on the roller switch position, ensuring optimal performance under varying conditions.

Ordering Instructions
The document provides a guide for ordering different models and configurations of multifunction grips, including series, pivots, special versions, and connector options. Specific codes are provided for configurations without connectors or signals, with references to additional pages for further details.

Catalog excerpts

- BONDIOLI LSI A & PAVESI l5J w mmiM.iurrm IMPUGNATURE GRIPS GRIFFE

Open the catalog to page 1

IMPUGNATURE GRIPS GRIFFE INTRODUZIONE INTRODUCTION EINLEITUNG HP Hydraulic produce una gamma completa di impugnature concepite per l’utilizzo su macchine operatrici mobili per il movimento terra e per il cantiere ma che trovano impiego anche su macchine operatrici mobili per uso agricolo. Per facilitare la selezione per ogni impugnatura vengono indicate le caratteristiche e le configurazioni standard. Per applicazioni o configurazioni speciali prego contattare i nostri uffici. HP Hydraulic produces a full range of hand grips designed for use on working vehicles in earthmoving applications, on...

Open the catalog to page 2

IMPUGNATURA ANATOMICA ANATOMIC GRIP ANATOMISCHER GRIFF

Open the catalog to page 3

PERNI IMPUGNATURA GRIP PIVOTS GENEIGTE GRIFFE INCLINATA 15° DESTRA M10 RIGHT TILTED 15° M10 15° NACH RECHTS GENEIGT M10 DRITTO M12 STRAIGHT M12 GERADE M12 DRITTO M10 STRAIGHT M10 GERADE M10 INCLINATA 15° DESTRA M12 RIGHT TILTED 15° M12 15° NACH RECHTS GENEIGT M12 INCLINATO 15° SINISTRA M12 LEFT TILTED 15° M12 15° NACH LINKS GENEIGT M12 INCLINATO 15° SINISTRA M10 LEFT TILTED 15° M10 15° NACH LINKS GENEIGT M10

Open the catalog to page 4

BONDIOLI & PAVESI COMANDI ELETTRICI ELECTRIC CONTROLS ELEKTROSTEUERUNGEN CONFIGURAZIONI SUPERIORI TOP CONFIGURATIONS SCHALTER OBEN CONFIGURAZIONI FRONTALI FRONT CONFIGURATIONS ANORDNUNG VORN CAPACITA MICRO: DC 12V x 2A MICRO CAPACITY: DC 12Vx 2A MIKROKAPAZITAT: DC 12V x 2A CAPACITA MICRO: DC 12V x 2A MICRO CAPACITY: DC 12V x 2A MIKROKAPAZITAT: DC 12V x 2A NESSUN PULSANTE SUPERIORE NO TOP BUTTON KEIN OBERER TASTER NESSUN INTERRUTTORE M4 NO M4 BUTTON KEIN TASTER M4 1 INTERRUTTORE FRONTALE M4 A BILANCIERE CON RITORNO A MOLLA 1 FRONT SWITCH M4 WITH ROCKING LEVER WITH SPRING RETURN-TO-CENTRE 1 FRONTSEITIGER...

Open the catalog to page 5

Questa pagina è intenzionalmente bianca This page is intentionally blank Diese Seite ist bewusst frei gelassen

Open the catalog to page 6

ISTRUZIONI PER L’ORDINAZIONE ORDERING INSTRUCTIONS BESTELLANLEITUNG VERSIONI SPECIALI SPECIAL VERSIONS SONDERAUSFÜHRUNGEN SERIE SERIES SERIE MODELLI MODELS MODELLE CONNETTORE CONNECTOR SCHALTER 0 = Senza connettore PERNI PIVOTS BEFESTIGUNGSBOLZEN 0 = No connector 0 = Ohne Schalter Vedere pag. 50 See page 50 Siehe Seite 50 COMANDI ELETTRICI CONFIGURAZIONE SUPERIORE ELECTRIC CONTROLS TOP CONFIGURATION ELEKTROSTEUERUNGEN ANORDNUNG OBEN Vedere pag. 51 See page 51 Siehe Seite 51 COMANDI ELETTRICI CONFIGURAZIONE FRONTALE ELECTRIC CONTROLS FRONT CONFIGURATION ELEKTROSTEUERUNGEN ANORDNUNG VORNE Vedere...

Open the catalog to page 7

IMPUGNATURA CILINDRICA CYLINDER GRIP ZYLINDRISCHER GRIFF

Open the catalog to page 8

BONDIOLI & PAVESI PERNI IMPUGNATURA GRIP PIVOTS GENEIGTE GRIFFE HPCI INCLINATA 15° DESTRA M12 RIGHT TILTED 15° M12 15° NACH RECHTS GENEIGT M12 INCLINATA 15° DESTRA M10 RIGHT TILTED 15° MW 15° NACH RECHTS GENEIGT M10 DRITTO M10 STRAIGHT MW GERADE M10 INCLINATO 15° SINISTRA M10 LEFT TILTED 15° MW 15° NACH LINKS GENEIGT M10 DRITTO M12 STRAIGHT MW GERADE M12 BINCLINATO 15° SINISTRA M12 LEFT TILTED 15° 15° NACH LINKS GENEIGT M12

Open the catalog to page 9

COMANDI ELETTRICI ELECTRIC CONTROLS ELEKTROSTEUERUNGEN CONFIGURAZIONI SUPERIORI TOP CONFIGURATIONS ANORDNUNG OBEN CONFIGURAZIONI FRONTALI FRONT CONFIGURATIONS ANORDNUNG SEITLICH PULSANTE SINGOLO CON RITORNO A MOLLA SINGLE BUTTON WITH TOGGLE BUTTON SPRING RETURN EINZELNER DRUCKTASTER W|ppscHALTER CAPACITA MICRO: DC 12V x 8A MICRO CAPACITY: DC 12Vx 8A MIKROKAPAZITAT: DC 12V x 8A PULSANTE SINGOLO STABILE SINGLE PUSH-PUSH BUTTON EINZELNER DRUCKTASTER MIT RUCKSTELLFEDER PULSANTE SINGOLO INSTABILE SINGLE MOMENTARY BUTTON EINZELNE DRUCKTASTER MIT RUCKSTELLFEDER CAPACITA' MICRO: DC 28V x 10A RESISTIVA; DC...

Open the catalog to page 10

ISTRUZIONI PER L’ORDINAZIONE ORDERING INSTRUCTIONS BESTELLANLEITUNG VERSIONI SPECIALI SPECIAL VERSIONS SONDERAUSFÜHRUNGEN SERIE SERIES SERIE MODELLI MODELS MODELLE CONNETTORE CONNECTOR STECKER 0 = Senza connettore 0 = No connector 0 = Ohne Schalter PERNI PIVOTS BEFESTIGUNGSBOLZEN Vedere pag. 55 See page 55 Siehe Seite 55 COMANDI ELETTRICI CONFIGURAZIONE SUPERIORE ELECTRIC CONTROLS TOP CONFIGURATION ELEKTROSTEUERUNGEN ANORDNUNG OBEN Vedere pag. 56 See page 56 Siehe Seite 56 COMANDI ELETTRICI CONFIGURAZIONE FRONTALE ELECTRIC CONTROLS FRONT CONFIGURATION ELEKTROSTEUERUNGEN ANORDNUNG VORNE Vedere...

Open the catalog to page 11

IMPUGNATURA MULTIFUNZIONE MULTIFUNCTION GRIP MULTIFUNKTIONS GRIFF IMPUGNATURA ERGONOMICA ERGONOMIC HANDLE ERONOMISCHER GRIFF VERSIONE “E” + PULSANTE UOMO PRESENTE VERSION “E” + NO OPERATOR SAFETY VERSION “E” + TOTMANNSCHALTER PULSANTE UOMO PRESENTE OPERATOR SAFETY TOTTMANNSCHALTER

Open the catalog to page 12

PERNI IMPUGNATURA GRIP PIVOTS ANSCHLUSSGEWINDE FÜR GRIFFE INCLINATA 15° DESTRA M12 RIGHT TILTED 15° M12 15° NACH RECHTS GENEIGT M12 INCLINATA 15° DESTRA M10 RIGHT TILTED 15° M10 15° NACH RECHTS GENEIGT M10 DRITTO M12 STRAIGHT M12 GERADE M12 DRITTO M10 STRAIGHT M10 GERADE M10 INCLINATO 15° SINISTRA M12 LEFT TILTED 15° M12 15° NACH LINKS GENEIGT M12 INCLINATO 15° SINISTRA M10 LEFT TILTED 15° M10 15° NACH LINKS GENEIGT M10

Open the catalog to page 13

COMANDI ELETTRICI ELECTRIC CONTROLS ELEKTROSTEUERUNGEN HPCI CONFIGURAZIONI FRONTALI FRONT CONFIGURATIONS ANORDNUNG VORNE CONFIGURAZIONI SUPERIORI TOP CONFIGURATIONS ANORDNUNG OBEN CAPACITÁ MICRO: DC 12V x 2A MICRO CAPACITY: DC 12V x 2A MIKROKAPAZITÄT: DC 12V x 2A COLORE DEI PULSANTI SOLO VERDE BUTTONS ONLY AVAILABLE IN GREEN FARBE DER TASTER NUR GRÜN CAPACITÁ MICRO: DC 12V x 2A MICRO CAPACITY: DC 12V x 2A MIKROKAPAZITÄT: DC 12V x 2A COLORE DEI PULSANTI SOLO VERDE BUTTONS ONLY AVAILABLE IN GREEN FARBE DER TASTER NUR GRÜN NESSUN PULSANTE SUPERIORE NO TOP BUTTON KEIN OBERER TASTER NESSUN PULSANTE...

Open the catalog to page 14

ISTRUZIONI PER L’ORDINAZIONE ORDERING INSTRUCTIONS BESTELLANLEITUNG VERSIONI SPECIALI SPECIAL VERSIONS SONDERAUSFÜHRUNGEN SERIE SERIES SERIE MODELLI MODELS MODELLE CONNETTORE CONNECTOR STECKER 0 = Senza connettore 0 = No connector 0 = Ohne Schalter E = Senza presenza uomo F = Con presenza uomo E = Without No Operator contact F = With No Operator contact E = ohne Totmannschalter F = mit Totmannschalter PERNI PIVOTS BEFESTIGUNGSBOLZEN Vedere pag. 59 See page 59 Siehe Seite 59 COMANDI ELETTRICI CONFIGURAZIONE SUPERIORE ELECTRIC CONTROLS TOP CONFIGURATION ELEKTROSTEUERUNGEN ANORDNUNG OBEN Vedere...

Open the catalog to page 15

All BONDIOLI & PAVESI catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list