1. Catalogs
  2. BONDIOLI & PAVESI
  3. Aluminium Heat Exchanger | A22

Aluminium Heat Exchanger | A22

Aluminium Heat Exchanger | A22

Aluminium Heat Exchanger | A22

Product catalog summary
Overview: This document provides detailed specifications, dimensions, and performance characteristics for the A22 Aluminium Heat Exchanger. It includes information on various models, their electrical and hydraulic configurations, and associated accessories.
Specifications: The A22 heat exchanger is available in different configurations based on voltage (12V, 24V, 230V, 400V) and fan types (aspirating, blowing, high power). Key specifications include fan diameter, air flow rate, voltage, current, and weight. The document also details the bypass valves used, including thermostatic and pressure bypass types.
Dimensions: The document provides precise dimensions for each configuration, including the overall size and mounting details. It specifies the dimensions for both electrical and hydraulic actuation models.
Performance Characteristics: The document includes characteristic curves showing the heat exchange capacity, radiator passage pressure drop, and bypass passage load loss under various conditions. These curves are provided for different oil viscosities and temperatures.
Accessories: Accessories such as supporting feet and thermostats are detailed, including their dimensions and trigger temperatures. The document lists codes for ordering these accessories.
Key Data from Tables and Graphs: - Air flow rates range from 920 to 1100 m³/h for 12V and 24V models. - Pressure drop and heat exchange capacity are illustrated for different flow rates and temperatures. - Bypass valves operate at 3 bar and 4.5 bar, with specific temperature settings.
Recommendations: Users are advised to refer to the 'GENERAL INSTRUCTIONS FOR HEAT EXCHANGER USE' before operating the heat exchanger. Proper selection of bypass valves and accessories is crucial for optimal performance.
See more

Catalog excerpts

Aluminium Heat Exchanger | A22-1

Aluminium heat exchanger  Before using the heat exchanger, carefully read the document entitled GENERAL INSTRUCTIONS FOR HEAT EXCHANGER USE. 398SAE005EN02 - 27-07-2020

 Open the catalog to page 1
Aluminium Heat Exchanger | A22-2

Support foot not included (see Accessories) Code Air flow Voltage Current rate Weight Capacity

 Open the catalog to page 2
Aluminium Heat Exchanger | A22-3

Characteristic curves  Heat exchange (thermal) capacity Radiator passage pressure drop Temperature difference Constant temperature Constant viscosity 30 l/min 60 l/min 150 l/min Bypass passage load loss VT thermostatic bypass Q = 20 l/min TOIL = 40°C µOIL = 32 cSt Blowing High power aspirating High power blower Extra high power aspirating Extra high power blower Fan unit voltage Exchanger type Bypass valves Thermostatic bypass valve 3 bar 60°C T15 VNR Pressure bypass valve at 4.5 bar

 Open the catalog to page 3
Aluminium Heat Exchanger | A22-4

Support foot not included (see Accessories) Code Power Frequen- Speed cy Weight Capacity

 Open the catalog to page 4
Aluminium Heat Exchanger | A22-5

Characteristic curves  Heat exchange (thermal) capacity Radiator passage pressure drop Temperature difference Constant temperature Constant viscosity 30 l/min 60 l/min 150 l/min Bypass passage load loss VT thermostatic bypass Q = 20 l/min TOIL = 40°C µOIL = 32 cSt Bypass valves Blowing Fan unit voltage Fan unit voltage Thermostatic bypass valve 3 bar 60°C T15 VNR Pressure bypass valve at 4.5 bar Exchanger type

 Open the catalog to page 5
Aluminium Heat Exchanger | A22-6

Support foot not included (see Accessories) Code Weight Capacity A22 IA HYDR.MOT. GR1 bypass T15 V.T. 3 bar 60°C A22 IS HYDR.MOT. GR1 bypass T15 V.T. 3 bar 60°C A22 IA HYDR.MOT. GR1 bypass T15 VNR 4.5 bar A22 IS HYDR.MOT. GR1 bypass T15 VNR 4.5 bar

 Open the catalog to page 6
Aluminium Heat Exchanger | A22-7

Characteristic curves  Heat exchange (thermal) capacity Radiator passage pressure drop Temperature difference Constant temperature Constant viscosity Bypass passage load loss VT thermostatic bypass Q = 20 l/min TOIL = 40°C µOIL = 32 cSt Hydraulic aspirating Hydraulic blowing With motor mounting With integrated motor mounting Exchanger type Bypass valves Thermostatic bypass valve 3 bar 60°C T15 VNR Pressure bypass valve at 4.5 bar M27x2

 Open the catalog to page 7
Aluminium Heat Exchanger | A22-8

Characteristic curves Left supporting foot Code Left supporting foot 18 Code Right supporting foot FR290000012R 42 20 Thermostats Trigger temperature °C

 Open the catalog to page 8
Aluminium Heat Exchanger | A22-9

Characteristic curves  IP54 protected thermal switch Trigger temperature °C IP65 protected thermal switch M4

 Open the catalog to page 9

All BONDIOLI & PAVESI catalogs and technical brochures

  1. 1000 SERIES

    16  Pages

  2. S2003 series

    36  Pages

  3. S2001 series

    36  Pages

  4. SFT series

    36  Pages

  5. Grips - HPCI

    23  Pages

  6. SFT 017 Catalog

    728  Pages

  7. DC013

    124  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.