Group: BOLZONI Group
Catalog excerpts
Fork Positioners, High Performance Model 6-26xxG/A/F / 5-25xxF-Z The MEYER high performance Fork Positioner can hydraulically adjust the forks from the driver‘s position. Its robust design provides excellent visibility and an optimum fork lift truck residual capacity. The Shaft Guide Concept with solid material hard-chromed shafts and long-life bushings ensures a clean working environment and fast operation speed with synchronal fork travel. The standard fork truck forks are utilized. Bolt-on forks can optionally be supplied. The separate, constant sideshift of the type range 6-26 allows for an accurate load positioning. Many special designs, also with telescopic forks, are available. The type range 5-25 with the MEYER 360° rotator allows for an exceptionally smooth operation. info@meyer-world.com · www.meyer-world.com · www.bolzonigroup.com MEYER GmbH · Gittertor 14 · 38259 Salzgitter · Germany Tel. +49 5341 803-0 · Fax +49 5341 803-195
Open the catalog to page 1Fork Positioners, Shaft-guided seit 1953 Model 6-26 G/F (with Separate Sideshift) Load Centre Mounting Class Chassis Width Required Truck Carriage WIdth Opening Range to Centre of Fork Arm Carrier Lost Load Centre Horizontal Centre of Gravity • Separate sideshift. • Adjust forks within the frame width. • Excellent visibility and minimum residual capacity calculation. • Accurate fork movement as the fork carriers move on a round chromed bar. • For handling of palletised loads. • Standard lift truck forks can be fitted, without any modification.
Open the catalog to page 2Fork Positioners, Shaft-guided Load Centre Chassis Width Required Truck Carriage WIdth Opening Range to Centre of Fork Arm Carrier Lost Load Centre Horizontal Centre of Gravity Model 6-26 G/F (with Separate Sideshift) Two hydraulic functions required. The unit has a separate sideshift, stroke 100 + 100 mm. Lower hooks adjustable. ISO arm carriers are fitted with adjustable fork stops for variation in fork widths of up to “K” + 10 mm. • It is recommended that extra wide forks should be bolted on. • For use with standard forks (not included in price). • Arm carriers are predrilled with 3...
Open the catalog to page 3Fork Positioners, Shaft-guided Model 6-26 G/F-Z (with Separate Sideshift and Bolt-on Forks) Bereich: 1600 kg - 6000 kg Plus: • Separate sideshift. • Adjust forks within the frame width. • Excellent visibility and minimum residual capacity calculation. • Accurate fork movement as the fork carriers move on a round chromed bar. • For handling of palletised loads. • With bolt-on forks. Additional price per 100 mm fork length up to and including 1500 mm Above 1500 mm to 2400 mm with fork section 120 x 40...
Open the catalog to page 4Fork Positioners, Shaft-guided seit 1953 Load Centre Mounting Class Chassis Width Required Truck Carriage WIdth Opening Range to Centre of Forks Fork Section Fork Length Lost Load Centre Lost Load Centre Horizontal Centre of Gravity Model 6-26 G/F-Z ((with Separate Sideshift and Bolt-on Forks) Two hydraulic functions required. The unit has a separate sideshift, stroke 100 + 100 mm. Lower hooks adjustable. Forks are attached to arm carriers and secured with 3 bolts. Special widths. Different fork lengths. Load backrest. Quick disconnect lower hooks. Special drill holes. Design with...
Open the catalog to page 5Fork Positioners, Automotiv seit 1953 Model 6-26 A (separate Sideshift) Bereich: 2500 kg - 5000 kg Plus: Required Truck Carriage WIdth Horizontal Centre of Gravity Chassis Width Lost Load Centre Mounting Class Opening Range to Centre of Fork Arm Carrier 3-fach genuteter Load Centre • The special Automotive Execution of the MEYER shaft-guided Fork Positioner is designed around the particular demand of the logistic processes in the automotive industry. • With seperate Sideshift • Additional hydraulics required > one > two if sideshift required • ISO arm carriers are fitted with adjustable...
Open the catalog to page 6Fork Positioners, 360° rotating seit 1953 Model 5-25 F-Z (with bolt-on forks) Plus: • The MEYER fork positioner (bar type) can hydraulically adjust the spacing of the forks within its chassis width. The rotating fork positioner enables the hydraulic adjustment of the forks within the width of the truck. In addition the 360° continous rotation enables flexibility and discharge. A separate sideshift is also available. The unit is not suitable for clamping or squeezing. Opening Range to Centre of Fork Arm Carrier max. Fork Section Fork Length Lost Load Centre Lost Load Centre Eigenschwerpunkt...
Open the catalog to page 7BOLzaisn a jAUFRAMCD Lift Truck Attachments • Forks • Lift Tables
Open the catalog to page 8All BOLZONI S.p.A. catalogs and technical brochures
-
B-400P
2 Pages
-
G Serie
4 Pages
-
Series AR
4 Pages
-
Rotator
4 Pages
-
Carton and Appliance Clamps
4 Pages
-
Lift Tables
24 Pages
-
Model A1-EAAM
2 Pages
-
Model 1E
2 Pages
-
Models KG-H
2 Pages
-
Models RA-NJ
2 Pages
-
Model 1E-T
2 Pages
-
Model 6-53 / 6-69 / 6-53 V
4 Pages
-
6-26 GT
2 Pages
-
Model 6-25
8 Pages
-
Model A8C-A8U-A8E
2 Pages
-
Model 2E/2A
2 Pages
-
Hubtisch A8U - A8E
12 Pages
-
Models B-PF
2 Pages
-
Models B-P
2 Pages
-
Model KB-G
2 Pages
-
Model 6-26 G/F
8 Pages
-
Lift Tables
20 Pages
-
Company Profile 2016
16 Pages
-
Models AMR-RF / AMR-RH
2 Pages
-
Forks
12 Pages
-
Push-Pulls
4 Pages
-
Fork Clamp - Model KB-H
2 Pages
-
Bale Clamp Model KB-G
2 Pages
-
Carton Clamps
4 Pages
-
Paper Roll Clamp - Model AR
4 Pages
-
Reach Forks
4 Pages