Fork Positioners, High Performance Model 6-26xxG/A/F / 6-26xxG-T The MEYER high performance Fork Positioner can hydraulically adjust the forks from the driver‘s position. Its robust design provides excellent visibility and an optimum fork lift truck residual capacity. The Shaft Guide Concept with solid material hard-chromed shafts and long-life bushings ensures a clean working environment and fast operation speed with synchronal fork travel. The optimised design combines highest robustness with an optimum of visibility and residual capacity on the forklift truck. The separate, constant sideshift of the type range 6-26 allows for an accurate load positioning. Many special designs, also with telescopic forks, are available. [email protected] · www.meyer-world.com · www.bolzonigroup.com MEYER GmbH · Gittertor 14 · 38259 Salzgitter · Germany Tel. +49 5341 803-0 · Fax +49 5341 80

Fork Positioners, Shaft-guided seit 1953 Model 6-26 G/F (with Separate Sideshift) Load Centre Mounting Class Chassis Width Required Truck Carriage WIdth Opening Range to Centre of Fork Arm Carrier Lost Load Centre Horizontal Centre of Gravity • Separate sideshift. • Adjust forks within the frame width. • Excellent visibility and minimum residual capacity calculation. • Accurate fork movement as the fork carriers move on a round chromed bar. • For handling of palletised loads. • Standard lift truck forks can be fitted, without any modification.

Fork Positioners, Shaft-guided Load Centre Chassis Width Required Truck Carriage WIdth Opening Range to Centre of Fork Arm Carrier Lost Load Centre Horizontal Centre of Gravity Model 6-26 G/F (with Separate Sideshift) Two hydraulic functions required. The unit has a separate sideshift, stroke 100 + 100 mm. Lower hooks adjustable. ISO arm carriers are fitted with adjustable fork stops for variation in fork widths of up to “K” + 10 mm. • It is recommended that extra wide forks should be bolted on. • For use with standard forks (not included in price). • Arm carriers are predrilled with 3 holes....

Fork Positioners, Shaft-guided seit 1953 Model 6-26 G/F-Z (with Separate Sideshift and Bolt-on Forks) Load Centre Mounting Class Chassis Width Required Truck Carriage WIdth Opening Range to Centre of Forks Fork Section Fork Length Lost Load Centre Lost Load Centre Horizontal Centre of Gravity • Separate sideshift. • Adjust forks within the frame width. • Excellent visibility and minimum residual capacity calculation. • Accurate fork movement as the fork carriers move on a round chromed bar. • For handling of palletised loads. • With bolt-on forks.

Fork Positioners, Shaft-guided seit 1953 Load Centre Mounting Class Chassis Width Required Truck Carriage WIdth Opening Range to Centre of Forks Fork Section Fork Length Fork Upright Lost Load Centre Horizontal Centre of Gravity Model 6-26 G/F-Z ((with Separate Sideshift and Bolt-on Forks) Two hydraulic functions required. The unit has a separate sideshift, stroke 100 + 100 mm. Lower hooks adjustable. Forks are attached to arm carriers and secured with 3 bolts. Special widths. Different fork lengths. Load backrest. Quick disconnect lower hooks. Special drill holes. Design with telescopic forks....

Fork Positioners, Automotiv seit 1953 Model 6-26 A (separate Sideshift) Range: 2500 kg - 5000 kg Plus: Required Truck Carriage WIdth Chassis Width Horizontal Centre of Gravity Mounting Class Lost Load Centre Load Centre Opening Range to Centre of Fork Arm carrier • The special Automotive Execution of the MEYER shaft-guided Fork Positioner is designed around the particular demand of the logistic processes in the automotive industry. • With seperate Sideshift • Additional hydraulics required > one > two if sideshift required • ISO arm carriers are fitted with adjustable fork stops • Maximum fork...

Fork Positioners, Shaft-guided seit 1953 (with telescopic forks, with separate sideshift) chassis width Required Truck Carriage Width • Additional hydraulics required > two for the use of fork positioning and telescopic forks A solenoid vale is included to actuate the separate sideshift function (+/- 100 mm) • Telescopic forks secured with 3 bolts. • Including wear protection underneath the forks Centre of gravity retracted Centre of gravity extended Lost Load Centre Fork upright Fork Length Mounting Class Fork Section Load Centre opening range over forks • The combination of the proven MEYER...

BOLzaisn a jAUFRAMCD Lift Truck Attachments • Forks • Lift Tables