Tilting Platform Model 1E-T Helpful to pick out small parts from containers This range of lift tables has been designed as a “work station” to avoid adverse ergonomic conditions by giving the best possible relation between the operator and his work area. positioning loads below the waist level or the normal sitting position, means considerably reducing risks of back injuries in addition to increasing both efficiency and productivity. In order to be considered efficient, a work station must necessarily respect the worker’s health and comfort. The 1E-T lift tables represent the best solution. They can also be customized thanks to a wide range of accessories to satisfy the greatest variety of uses and therefore increase their functionality and safety in specific applications. During the manual handling of loads, avoiding for example operations where it is necessary to raise the elbows above shoulder height,

Tilting Platform Model 1E-T Range: 300 Kg - 1500 Kg • Aluminium safety bar stops the descent of the platform in case of contact with obstructions • 35° tilt (one way) by double acting cylinder. • Single acting hydraulic cylinders equipped with hose safety valve, check valve and drainage. • Maintenance props for safe maintenance operations. • Removable lifting eye(s) to make easier handling and installation • Low voltage (24V) control box with 5 buttons for an independent operation of the platform tilting (updownemergency stop – up-down tilting). • Compliance with the Machinery Directive 2006/42/...