Forks
12Pages

Production processes at the Piacenza plant, Italy. Quality, Safety, Efficiency Worldwide High quality Bolzoni Auramo offers complete range of forks for lift trucks, construction and agricultural material handling machines, in many different capacities, sections and lengths, ISO and special mountings. Innovation Strongly focused on product innovation, Bolzoni Auramo has employed the most advanced technologies and software for fork designing. By using first class raw material and applying modern technological solutions and automated production processes, forks are produced according to...

Production processes at the Longhua plant, P.R.C. Certified Quality Certified quality of chemical composition and of the heat treatment applied on raw material used. Bar coding allowing for the tracking of raw material back to source. All forks produced comply with the parameters outlined in ISO 2328 and 2330. In order to satisfy these standards, each different type of forks is subjected to the following tests: • • • 1 fatigue test of 1,000,000 cycles at 25% overload. 1 static test of 2 cycles with triple nominal capacity. 1 resilience test at -20°C with a resulting value higher than 27...

Forks ISO 2328 Mounting Class 2A Fork Length Weight of Single Fork Weight of Single Fork Fork Section Fork Length Mounting Class Fork Section Load Centre Mounting Class Load Centre Capacity for Fork Couple Capacity for Fork Couple • 1 The upper hook is wider than the fork width. ISO 2328 Class B mounting. Different fork sections and lenghts. Pin-type mounting. Forks for special applications.

Forks ISO 2328 Mounting Class 3A Weight of Single Fork Fork Length Weight of Single Fork Fork Section Fork Length Mounting Class Fork Section Load Centre Mounting Class Load Centre Capacity for Fork Couple Capacity for Fork Couple ISO 2328 Class B mounting. Different fork sections and lenghts. Pin-type mounting. Forks for special applications.

Forks ISO 2328 Mounting Class 4A Capacity for Fork Couple Load Centre Mounting Class Fork Section Fork Length Weight of Single Fork Capacity for Fork Couple Load Centre Mounting Class Fork Section Fork Length Weight of Single Fork ISO 2328 Class B mounting. Different fork sections and lenghts. Pin-type mounting. Forks for special applications.

FEM/ISO Mounting Standards The FEM / ISO mounting is the most common way of connecting forks to the lift-truck. According to the lift truck capacity, the ISO standards are divided into 5 classes, each of them having a „A“ and „B“ version. The difference between version „A“ and „B“ is the clearance from the lower hook to the floor. Measurements are defined by the International Standard ISO 2328. Main measurements are listed in the following chart: Truck Rated capacity Class Rated load center distance * Capacity ISO 5 are still often included in ISO 4. Hook Pin Kits Hook pin is a mandatory...

Forks Inspection and maintenance Forks in service on forklift trucks General Fork correct dimensioning and conditions are essential for safe, cost-effective and damage-free pallet handling operations. Therefore, a regular fork inspection system should be put in place to ensure perfect operating conditions. Inspections, repairs or replacements shall be carried out as a pair. Inspections Forks in use shall be inspected at intervals of 12 months or less depending on possible severe application, multi-shift operation and fork conditions. Regular inspections should be carried out by trained...

A wide range of ISO mounting forks with different tip and taper shapes, special application forks used in a variety of industries and handling situations: Bolzoni Auramo has the right fork for any application … Pin-Type fork Pin-Type Fork with Lower Hook Drum Handling Fork Fork Polished and Tapered Bolt-on Fork Fork with 3rd Hook Blank Fork Lumber Fork ...and even more! Coil Handling Fork For any questions or for further information, please contact Bolzoni Auramo.

Longhua Town Forks are produced in the dedicated state-of-the-art manufacturing plants in Piacenza, Italy and Longhua Town, Hebei, P.R. China. 11

BOLZONI S.p.A. I CASONI 29027 PODENZANO - PIACENZA (ITALIA) - Tel. +39 0523 555511- Fax +39 0523 524087 www.bolzonigroup.com - sales@bolzonigroup.com