Pulp Bale Clamps Models B-400P The Bolzoni Auramo B-400P bale clamps are the optimal choice for heavy-duty pulp-bale handling. The 4000 kg capacity at 800 mm load center and wide choice of frame widths and arm lengths enable easy and efficient handling of one or two bale units. The thin bale arm design allows tight and fast bale stacking and knifing. Good visibility through the clamp body makes the clamp easier to operate. Built-in internal sideshift makes driving faster and reduces lift truck manoeuvring. The aluminum profile frame and T-profile steel arm carriers make the clamp frame light - yet extremely strong. All Bolzoni Auramo pulp and wastepaper bale clamps come equipped with built-in wear bars mounted on the clamping arms. Several arm options are available. The arm carrier bearings, made of special plastic, are easily replaceable and require a minimal amount of service and lubrication. The hydraulic valves are well protected behind the clamp frame. The B-400P clamps are compatible with all standard industrial lift trucks. ISO 2328 class 3 and 4 mountings as well as special mountings are available.

Pulp Bale Clamps Models B-400P Range: 4000 Kg Frame Width Minimum Carriage Width Centre of Gravity Horizontal Centre of Gravity Vertical Effective Thickness Mounting Height Mounting Class Two hydraulic functions. Pressure relief valve on clamping. Integral sideshift. Arms bolted to the arm carriers. Special opening ranges. Special arm lengths Arms welded to the arm carriers Load backrest. Cylinder protection. AURAMO OY P.O.BOX 78 - VALIMOTIE 22 - FIN-01511 VANTAA (FINLAND) - Tel. +358-9-82-931- Fax +358-9-87-01-037 www.bolzonigroup.com - [email protected] Opening Range Load Centre B ale...