PKA-500 PHA-500 PHA-500-6

Product catalog summary

Overview: This document provides technical specifications and characteristics for the BOLTE automatic stud welding guns: PKA-500, PHA-500, and PHA-500-6. These tools are designed for various welding methods including capacitor discharge, short cycle, and drawn arc welding.

Specifications:

Welding Methods: The PKA-500 is suitable for capacitor discharge (contact method), while the PHA-500 and PHA-500-6 support capacitor discharge (gap), short cycle, and drawn arc welding.
Welding Range: All models support a welding range of 3-8 mm in diameter, with other diameters available upon request.
Materials Supported: These guns can weld steel, stainless steel, aluminum, and brass.
Stud Feeding: Options include automatic and semi-automatic (manual insertion).
Adjustable Features: Spring pressure and lift are adjustable, with automatic length compensation available.
Piston Guide: All models feature slide-bearing piston guides.
Welding Cable: The cross-section is 25 mm², with varying lengths: 6.5 m for PKA-500, 3 m for PHA-500, and 5 m for PHA-500-6.
Control Cable Plug: All models use a 7-pin plug.
Housing: Made from impact-resistant plastics with protection against welding spatters.
Dimensions and Weight: The PKA-500 measures 60x172x235 mm and weighs 1.1 kg, the PHA-500 is 60x172x290 mm and 1.6 kg, and the PHA-500-6 is 60x172x335 mm and 1.7 kg.

Contact Information: Bolte GmbH, with locations in Gevelsberg and Dachau, Germany. Contact via phone or email for further inquiries.

Note: The document reflects the technical standards as of the last update in June 2018, with potential errors and omissions excepted.

Catalog excerpts

STUD WELDING TECHNOLOGY BY STUD WELDING

Open the catalog to page 1

PKA-500 AUTOMATIC STUD WELDING GUN FOR CAPACITOR DISCHARGE STUD WELDING (CONTACT METHOD) PHA-500 AUTOMATIC STUD WELDING GUN FOR CAPACITOR DISCHARGE, SHORT CYCLE AND DRAWN ARC STUD WELDING PHA-500-6 AUTOMATIC STUD WELDING GUN FOR SHORT CYCLE AND DRAWN ARC STUD WELDING

Open the catalog to page 2

TECHNICAL DATA AND CHARACTERISTICS PKA-500 Welding method Capacitor discharge (contact) Short cycle Capacitor discharge (contact) Short cycle Welding material Steel Stainless steel Stud feeding automatic semi-automatic (manual insertion) Spring pressure adjustable Lift adjustable Automatic length compensation Piston guide Slide-bearing Housing from impact resistant plastics Protection of piston guidance from welding spatters Weight without cable (kg) Welding cable Control cable plug Other diameters on request.

Open the catalog to page 3

Open the catalog to page 4

PKA-500 PHA-500 PHA-500-6

PKA-500 PHA-500 PHA-500-6

Catalog excerpts

All Bolte GmbH catalogs and technical brochures