Technical information sheet With a recovery rate up to 98% the PaperMagnet® separates light 2D materials, such as paper, cardboard and foil from 3D and/or heavy materials, such as containers, bottles, containers and stones. The PaperMagnet® is perfectly suited to recover paper, Other heavy materials will be discharged at the cardboard and film from a polluted Single Stream or bottom also due to weight. Dual stream flow with a high accuracy. By adjusting the parameters, conveyor speed and The principal of separation is based on a belt conveyor airflow, an optimal adjustment can be achieved for which is put under a steep angle and which is creating different material inputs and separation qualities for a vacuum force at the belt surface. Due to the design of this vacuum conveyor, the light 2D materials will be transported to the top discharge side of the conveyor. Depending on the size and composition of the material 3D parts will roll or slide back to the bottom discharge input recovery rates of 85 to 98% can be established. side of the conveyor due to shape and/or weight.

The separation unit will be delivered with the following fittings Note The Jet cleaning requires a compressed air connection to the pressure 100% cleaning of the process air by filter units. tank of the filter unit. The requirement for this connection, which is not A Jet cleaning unit is incorporated in the filter installation. All the necessary air ducting for installation of the filter units within a radius of 10 meters from the PaperMagnet . Consumption: approx. 1,000 normal litres per minute. Pressure: 6.0 bars Connection: 1” pipe with shut-off, filter and water separator. Options as per...