Boix launches the new Q-1530. Why changing the name?: Quality range links name and speed, Q-15xx refers to the chassis and machine model, and 30 refers to the box production per minute. 30 boxes per minute = 1800 boxes/hour --- Q-1530 1) Couldn’t change the name into Q1800 as it already exists. 2) Serial numbers will begin from 2000 to set a difference with the Q-1500 numbers

• Higher box output: – 1.800 boxes per hour. – 20 % higher production compared to the Q-1500. – Wide speed range from 400 until 1.800 boxes / hour. – ½ speed mode also available • 4 operating modes : – Standard mode. – Stopping pusher in the mould area. – Former stop in forming chamber. – Forme

Operating modes Standard Mode: – Pusher and former acting continuously with no stops. Pusher stop: – Pusher will stop in the forming section to avoid cardboard damage

Operating modes Former stop: – Former will stop in the lower position in the mould for a period of time determined by the operating speed of the machine. – Former speed will always be the maximum one in order to have the maximum compression time in the mould. Former and pusher stop: – Pusher will stop in the forming section and former in the lower position. – Better adjustment of glueing time of the

New glue tank position: – Next to the blank magazine enables easy maintenance and use. – Can be set to different positions: • Depending on blanks size. • Aligned with the chassis for transport. . Polycarbonate doors: – Better visibility. – Improves safety and acoustic isolation. – Fullfills CE regulations in terms of strength, protection and resistance. – Bigger front door windows f

New screen and graphics: – Screen change from 5” to 7” (Schneider). – New graphics and user friendly interface. – 20 different internal blocks. – New features: • Counter values. • Zero point adjustment by screen, no need to set the encoder manually. • Glue patterns. • 11 languages available. They can be selected by the screen at any moment. – Safety and access levels set up: • User levels can be set restricting or enabling the access to different paramet

browser: – Total and partial box production of the machine. – Machine maintenance needs. – Status of the machine, operating or switched off, activated kits, alarms, operating speed, etc… Internal air compressor installation: – Movable platform to enable maintenace. – Cable prot

Electrical cabinet changes: – Signal connection by distributors (relay inside the SAI) – Interchangeable exits. – More accurate glue firing. – New Mitsubishi PLC and inverters. Former motor – 24 v motor brake to avoid tension problems. – Motor coupled encoder: • More precision. • Less maintena

New Festo pneumatic valves: – Installed maintenance and improve durability. – Higher air flow improving speed in movements. LED mould lightning: – Activated from the screen. – Better mould visibility. – Activated when any door

Former height stop set up: – Up to 3 different heights can be set so the former stops before pushing the cardboard. This allows a lower acceleration of the former, avoiding glue splatter and noise. Better accessibility: – Access on both sides of the mac

Feeder support adjustment: – BTH handles to enable adjustments without tools. New standard counters: – Introducer set and mould sec

Changes in the chassis: – Easier conveyor and stacker positioning, now 90º. – Wheel still has to be removed. Transport protection bar: – New support for storing the protection once the machine is in